Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My GU 3 litre has developed a vibration when changing into top gear. It is an auto. When it changes into top gear on the highway, it fells like the tailshaft starts to vibrate. It goes out fairly quick but today it was more of a shudder. I have check the uni and tailshaft, diff oil, greased the shaft and unis. Tailshaft is not out of balance as it only vibrates on this one gear change. Any ideas.
Russels Automatics at Oxenford. Converter rebuild if it is ok or an extra 250 for a new one. If i go new i may get a higher stall if available. Strip the box and check the clutches, play with a spring or two to make it hold gears a bit more. see what happens with it.
Got mine back friday night and drives like a new car again, no more shudders, slips into overdrive (convertor lock) as soon as i stop accelerating hard in 4th.
Good to hear the proplem is gone. How did it go this morning, did it hold 3rd until it warmed up or is that fixed to? Mine was suppose to go in today but i am working in WA until the end of the month. Has to wait.
