Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lt230 t/case

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 143
Joined: Tue Nov 27, 2007 8:18 am
Location: Yamanto

lt230 t/case

Post by q_ship »

gday guys was just wondering if anyone knows the distance between the 2 front flanges on the lt230 t.case?

centre to centre measurements would be great

thanks in advance guys
MQ Dual Cab RB30 INJ well on its way....

LRP 4X4 FABRICATIONS; CALL 0417724127 FOR JUST ABOUT ANYTHING...
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Is it the offset between input and output you want?
It's 230mm. :D
Top
Posts: 143
Joined: Tue Nov 27, 2007 8:18 am
Location: Yamanto

Post by q_ship »

thanks mate

no the distance between the 2 front flanges

essentially wanna know if its wider than my mq transfer

cheers
MQ Dual Cab RB30 INJ well on its way....

LRP 4X4 FABRICATIONS; CALL 0417724127 FOR JUST ABOUT ANYTHING...
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

q_ship wrote:thanks mate

no the distance between the 2 front flanges

essentially wanna know if its wider than my mq transfer

cheers
I'd like to help, but I've got no idea what you're asking.
Distance from mounting face to front drive flange?
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

q_ship wrote:thanks mate

no the distance between the 2 front flanges

essentially wanna know if its wider than my mq transfer

cheers
I have no idea either??? As Dougal said, the distance between the centreline of the input and the centreline of the outputs is 230mm.

If that isn't what you want, maybe post up a pic/diagram, so we know - then one of use will be more than happy to measure it for you.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

wow! maybe he wants the length of the unit from front flange to rear flange?
Top
Posts: 143
Joined: Tue Nov 27, 2007 8:18 am
Location: Yamanto

Post by q_ship »

this is very rough guys. i need the distance between the 2 front flanges. distance between the input shaft flange and the front tailshaft flange?

thanks for your help


Image[/img]
MQ Dual Cab RB30 INJ well on its way....

LRP 4X4 FABRICATIONS; CALL 0417724127 FOR JUST ABOUT ANYTHING...
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

230mm

michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 143
Joined: Tue Nov 27, 2007 8:18 am
Location: Yamanto

Post by q_ship »

thanks guys
MQ Dual Cab RB30 INJ well on its way....

LRP 4X4 FABRICATIONS; CALL 0417724127 FOR JUST ABOUT ANYTHING...
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

q_ship wrote:thanks guys
The front and rear output shafts are also directly inline.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests