Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g16a ecu pinout diagram for 33920-60A61 SPI

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

g16a ecu pinout diagram for 33920-60A61 SPI

Post by suzimad »

Have looked everywhere and cannot find ecu pinout diagram for this ecu.

stripped the loom ages ago and about to install and forgot what some of the wires are. (im sure i had the diagram when i did this)

did searches here and looked on suzukiinfo and googled for the past hour but came to a blank .
Top
Posts: 16
Joined: Sat Dec 02, 2006 10:46 am
Location: Tauranga NZ

Post by Bluezuki »

Go to suzukiinfo and look at the Suzuki G13BA TBI Wiring diagram.

Should be what your after. ;)
Top
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

Post by suzimad »

Thanks but no thats not what im after.

im after the view of the sockets and their purpose eg a1 a2 a3... , wires colours and purpose.
Top
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Contact:
Contact Rotazuk

Post by Rotazuk »

Try this , not sure if its the one you want thou

http://www.yankeetoys.org/mini4x/efiswap/efiswap.htm

Chris
Top
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

Post by suzimad »

no i got that one , it was the same plug config but the wires were all different colour to what i have .
Top
Posts: 445
Joined: Mon Feb 11, 2008 9:54 pm
Location: Perth

Post by PCRman »

either of these help

Image

Image
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

The pin-out for the single point injection is pretty much the same between trackers, vitara's, metro's etc etc. The wire colour and trace colour do differ, but the acutal pin-out matches. When i swapped MUD4B's old setup onto Pyro's zook i used a Geo tracker diagram to check and trace the loom.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

Post by suzimad »

Cheers , ill figure it out. gonna have a pretty shit hot sierra soon when i finish buying all the bits and pieces.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests