Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suspension lift kit
Suspension lift kit
Hi there im just after some opinions on what i should be getting???
i want 6 inch and just want your ideas on what things i should get expense isnt that big of a deal but cheaper is better.
i dont want to go extreme though so standard stuff not coil overs or air shocks or anything
cheers
i want 6 inch and just want your ideas on what things i should get expense isnt that big of a deal but cheaper is better.
i dont want to go extreme though so standard stuff not coil overs or air shocks or anything
cheers
Re: Suspension lift kit
Have you tried looking through any previous threads?? Cause your not the breaking new ground here.
well, why are you asking on here?garfootd wrote:yes of course its worth it..
and im sure it is fine as long as it is engineered which it will be
wouldn't it be so much easier to pick up the phone, call an engineer, and find out what they think?
the engineer is the one who has the final say, so why not include them from day 1, will save A LOT of hassles down the track.
yes, forums might be good for finding out which brands are good etc. but when it comes to the re designing of your suspension, it is probably best to leave it to the professionals.
by all means, search, and find out what other have done, so that you can throw some ideas out there when chatting to your engineer, but don't expect the answers you get on here to be 100%
Legally engineered tyres of coursebogged wrote:so why do you need a 6inch lift?garfootd wrote:yes of course its worth it..
and im sure it is fine as long as it is engineered which it will be
What tires you planning on running?
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
hey its pretty good to talk big on here ayy..
the reason i dont like reading is because my eyes are FUCKED and it is a struggled to read the little words...
and jst for the smart asses NO glasses dont help...
i have a eye disease called "keratoconus"
if you would like to search tht up you might understand
and maybe u might not be f@#kwits
cheers
the reason i dont like reading is because my eyes are FUCKED and it is a struggled to read the little words...
and jst for the smart asses NO glasses dont help...
i have a eye disease called "keratoconus"
if you would like to search tht up you might understand
and maybe u might not be f@#kwits
cheers
Well said seems that these couple of guys just love to tell people to do searches instead of actualy helping and they must have plenty of spare time for themselves to evolve as wankers LOL
Try helping every now and then instead of insulting people on every post that is put up.
I am also about to go to a 5" setup (just because i can) i am getting it second hand but i know the history of it. When i put it in i will let you know what it is and how it performs but hopefully you might get some help here from some of the people who actualy help on here.
Try helping every now and then instead of insulting people on every post that is put up.
I am also about to go to a 5" setup (just because i can) i am getting it second hand but i know the history of it. When i put it in i will let you know what it is and how it performs but hopefully you might get some help here from some of the people who actualy help on here.
have grinder will fit
www.4Bfabrications.com.au
www.4Bfabrications.com.au
he can get a 6" lift and 37s engineered here in NSWGwagensteve wrote:Legally engineered tyres of coursebogged wrote:so why do you need a 6inch lift?garfootd wrote:yes of course its worth it..
and im sure it is fine as long as it is engineered which it will be
What tires you planning on running?
Steve.
i think you'll find that he is after some advive in the way of drop boxes, different arms (which ones have proven themselves), are there things inn lift "kits" that are not really necessary, where he will be able to save some coin, what brands to steer clear of etc.....
question that some of you lot might have asked back when you all got into 4wding!
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
If you go in the mates rates section of my web site in the 4-5" lift section you will find a lot of good info. I haven't really kept the 6" lift section up to date so the info isn't as good, all the prices are the same though.
Also I have been changing my 4-5" lift flexy coils for better flex and they have morphed into more like a 5" lift plus. They do give more flex then the 6-7" lift coils though. Through testing the front were low compared to the rear and I asked if they want the rears lower but every single person wanted the fronts to match the rear so there are at least a few guys who want the bigger lifts.
I personally would run the 3" lift flexy coils so the cops don't bother me but I am in Qld.
Click on the link below, it is worth the read and then call for questions when the eyes hurt.
Shane
0409 593 414
Also I have been changing my 4-5" lift flexy coils for better flex and they have morphed into more like a 5" lift plus. They do give more flex then the 6-7" lift coils though. Through testing the front were low compared to the rear and I asked if they want the rears lower but every single person wanted the fronts to match the rear so there are at least a few guys who want the bigger lifts.
I personally would run the 3" lift flexy coils so the cops don't bother me but I am in Qld.
Click on the link below, it is worth the read and then call for questions when the eyes hurt.
Shane
0409 593 414
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
I reckon it should all be deleted after 7 days, would save on server space too..grimbo wrote:lucky he explained the reason otherwise people might have thought he was just lazy and couldn't be bothered reading through some of the useful tech on herebogged wrote:garfootd wrote:... its alot of reading something tht i dont like doing lol...
ya learn to ignore em.garfootd wrote:UrbanRedneck
thanks for the support there... there does seem to be some of those wankers with too much time on there hands haha...
and thanks for the info would be good to hear from ur installation of ur kit
cheers
personally id rather go a 4" lift and 2" body if you really want the height of a 6", will keep the weight down a lil more, then from what ive read and seen 4" flexi coils, drop boxes and the super flex arm, not sure on the best shock to run with this setup, would like to know though, Shane???
[/quote]
personally id rather go a 4" lift and 2" body if you really want the height of a 6", will keep the weight down a lil more, then from what ive read and seen 4" flexi coils, drop boxes and the super flex arm, not sure on the best shock to run with this setup, would like to know though, Shane???[/quote]
Procomps
personally id rather go a 4" lift and 2" body if you really want the height of a 6", will keep the weight down a lil more, then from what ive read and seen 4" flexi coils, drop boxes and the super flex arm, not sure on the best shock to run with this setup, would like to know though, Shane???[/quote]
Procomps
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
garfootd, Dobinsons Suspensions make the "flexy coils" (extra droop, more a progressive rate coil really) and have been playing around with different designs for years.
I run 6" linear coils, (no body lift) 35's, Tough Dog adjustable panhards and Big O Dropped Radius Arms with slotted GU bushes. Oondys Big O drop arms achieve the right castor and the GU slotted bushes flex the best and last the longest. Its a nice all round set up for the off roading that I do.
You'll also need extended diff breather lines, The rear brake line is long enough for the front and a longer one required for the rear. Adjustable rear upper link arms and 15-20mm extended lower arms will sort out the rear diff pinion angle. $ are starting to add up now . You need extended sway bar links too so the sway bar is close to horizontal with the chassis, slightly upward is best so it levels out when the back is loaded up. The sway bar works best at the horizontal position at normal ride height. Mine has the factory disconnect system but I modified it to sit the sway bar "level" at ride height and also to give about 300% more free travel when disconnected. Works a treat I just extended the LH link accordingly. Hope thats some useful info for ya anyway. I too know the pain of searches and the "helpful" replies you will sometimes get.
Cheers, sudso
I run 6" linear coils, (no body lift) 35's, Tough Dog adjustable panhards and Big O Dropped Radius Arms with slotted GU bushes. Oondys Big O drop arms achieve the right castor and the GU slotted bushes flex the best and last the longest. Its a nice all round set up for the off roading that I do.
You'll also need extended diff breather lines, The rear brake line is long enough for the front and a longer one required for the rear. Adjustable rear upper link arms and 15-20mm extended lower arms will sort out the rear diff pinion angle. $ are starting to add up now . You need extended sway bar links too so the sway bar is close to horizontal with the chassis, slightly upward is best so it levels out when the back is loaded up. The sway bar works best at the horizontal position at normal ride height. Mine has the factory disconnect system but I modified it to sit the sway bar "level" at ride height and also to give about 300% more free travel when disconnected. Works a treat I just extended the LH link accordingly. Hope thats some useful info for ya anyway. I too know the pain of searches and the "helpful" replies you will sometimes get.
Cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
hey bud with the 3'' flexi kit (link attached below) i get more flex than most of my mates with 6'' lift and i dont get hassled by the po po .
and u only need
adjustable panhards
rear brake line
2deg caster bush
longer rear sway bar pins
and u only need
adjustable panhards
rear brake line
2deg caster bush
longer rear sway bar pins
https://www.suspensionstuff.com.au/shop/product_info.php?cPath=137_40_69&products_id=996
yeah fancy trying to figure out what vehicle you have and pointing out there is a hell of a lot of this info already on the site. Fair enough you have an eye condition that makes trolling through lots of pages hard, mention it rather than just saying can't be bohered. Forums work very well when people give as much info as possible and help themselves as much as they can. Clearly communicating with each other helps everyone. Of course this is being a wanker for trying to get as much info as possible and for trying to help people get the best out of the forumgarfootd wrote:UrbanRedneck
thanks for the support there... there does seem to be some of those wankers with too much time on there hands haha...
and thanks for the info would be good to hear from ur installation of ur kit
cheers
Ransom note = demand + collage
Some people don't like to tell everyone they have a condition of some kind. If you have seen 100 identical questions on here maybe you spend too much time on heregrimbo wrote:yeah fancy trying to figure out what vehicle you have and pointing out there is a hell of a lot of this info already on the site. Fair enough you have an eye condition that makes trolling through lots of pages hard, mention it rather than just saying can't be bohered. Forums work very well when people give as much info as possible and help themselves as much as they can. Clearly communicating with each other helps everyone. Of course this is being a wanker for trying to get as much info as possible and for trying to help people get the best out of the forumgarfootd wrote:UrbanRedneck
thanks for the support there... there does seem to be some of those wankers with too much time on there hands haha...
and thanks for the info would be good to hear from ur installation of ur kit
cheers
If something has been asked to death then don't click on it.
Having said that, saying you couldn't be bothered probably wasn't the best approach but so what as far as I am concerned.
One thing that is annoying is seeing every thread with search noob written on it, search search search search search search search search search search search search search search search search search search search search. Stuff that just ask the question and someone will answer it for you.
No personal attack meant for you Grimbo, this is really just a general winge using you as an example, I hope I don't offend you.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
SUDSO, Dobinsons make my flexy coils however the designs I use are exclusive to Suspension Stuff and are more tailored to the average off roader. I have made them firmer to ride equivalent to regular coils and so they can carry the same loads.
Even though technically my coils are variable they will not ride variable but behave like a linear coil. The reason for this is because the tightly wound turns on my coils are fully compressed under normal driving conditions and only do their thing when you are flexed up. You don't get the uber soft feeling that some might imagine.
The flexy coils that Dobinsons have are way too soft.
Shane
Even though technically my coils are variable they will not ride variable but behave like a linear coil. The reason for this is because the tightly wound turns on my coils are fully compressed under normal driving conditions and only do their thing when you are flexed up. You don't get the uber soft feeling that some might imagine.
The flexy coils that Dobinsons have are way too soft.
Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Who is online
Users browsing this forum: No registered users and 29 guests