i shat a turbo and put a hiflo garret on

Website · Post by **cooter** » Sat Sep 06, 2008 5:41 pm

94 disco 300tdi Snapped impeller shaft and i am in need of a new turbo if any1 has one
also what are my options int the area of aftermarket turbos for the tdi
( i tried search but with no luck)

Post by **ISUZUROVER** » Sat Sep 06, 2008 6:53 pm

There is a kit available to fit the variable vane turbo from the HS2.8. There are pics floating round on AULRO.

Post by **Bush65** » Sat Sep 06, 2008 7:00 pm

pm sent.

Because the turbine housing is part of the exhaust manifold, you need another manifold to fit an aftermarket turbo.

There is a place that use a mitsubishi turbo and manifold for the 300Tdi - kit was $2400, may be more now.

If you could get a 200Tdi manifold, you could adapt other turbos.

Website · Post by **cooter** » Sat Sep 06, 2008 8:13 pm

Bush65 cheers mate much appreciated

Website · Post by **cooter** » Mon Sep 08, 2008 8:57 pm

john i have decided to rebuild that turbo i got from u as it has a slight leak from the seals got a price of 600 for a reco and high flow wheel fitted and internal polish
made it cheaper that the turbo is in reasonably good condition to start with off to sydney tomorrow to get it done
thanks again ya bloods worth bottling

Post by **KiwiBacon** » Tue Sep 09, 2008 5:57 am

If you want to rebuild it yourself, a rebuild kit from Ebay (T2/T25 Garrett) will cost you under $100 on your doorstep.

It takes a couple of hours if you're slow and it's not a difficult job either.

Website · Post by **cooter** » Tue Sep 09, 2008 10:33 pm

thought of doing it myself but wanted to get it hi flowed as well
so bugga it atleast this way i get 1.5 years warranty on workmanship

Website · Post by **cooter** » Wed Sep 10, 2008 10:05 pm

final price $632 including freight back here high flow full rebuild and internal polish bought a slightly bigger intercooler 2nd hand from ebay uk 6 months ago when mine was leaking so once i get it cleaned out and the turbo fitted i will be haulin
all i need now is a metal head gesket as the stock one wont handle the boost
Has anyone oringed the cyl head on the 300 tdi?

Post by **Bush65** » Thu Sep 11, 2008 7:23 pm

Given the engine hasn't had a bad overheating episode and both head and deck are flat. I would use a new set of head bolts, lubricate the threads and under the bolt head with moly grease then over tighten them a little. Also better if you use more, smaller tightening sequences to get to the final tension.

And just because they are tightened using a part turn method, does not mean that they are already tightened to yield as many people assume.

I have heard that full metal gaskets are available now, but have not seen them personally. They should withstand the pressure better than the composite gaskets.

Website · Post by **cooter** » Mon Sep 15, 2008 9:08 am

cheers john i will save this link for when i do the gasket the turbo will be back over the next couple of days
thanks again
Allan

Website · Post by **cooter** » Mon Sep 15, 2008 10:16 pm

put the reco hi flo on tonight wow my old turbo must have been r00ted
i refit the old boost controller on the setting it was at on my old turbo (17psi) she went straight to 25psi

pulled over quick smart she is now set at 17.5 pounds and goes like a rocked and egt max at 620 lugging up a massive hill
but at 25 psi it was breaking traction

don't think it would last long at that boost setting

might leave that till its time for an engine conversion

if any 1 ever needs their turbo rebuilt contact precision turbochargers at wetherill park on02 97565757
a full kit and hi flow inc machining was 630 delivered to my door

Post by **Bush65** » Tue Sep 16, 2008 7:15 pm

That's good news.

Website · Post by **cooter** » Tue Sep 16, 2008 8:46 pm

im having troubles keeping boost hoses on im gunna put some better clamps on tomorrow

as the stock ones are knackered

Post by **KiwiBacon** » Wed Sep 17, 2008 7:32 am

Any idea what size wheel they put in there?

Website · Post by **cooter** » Wed Sep 17, 2008 9:11 am

KiwiBacon wrote:Any idea what size wheel they put in there?

mate not 100% sure in the end as we tried 4 different wheels it ended up being a large t25 wheel and a few sizes larger if that helps
he tried a huge one but it ended up having way to much lag on the test bench so went 1 down and it is sweet
2000rpm she starts boosting and is at full boost by 2100
all in all im very happy with the result
my old turbo used to start boosting at 1800 and reach full boost by 2000
and sounded like it was doing eleventy billion rpm whereas this seems to be a lot better exhaust temps are lucky to reach 600 now where i was peaking 740 before with intercooler water misters
all in all i would recommend the service to any1
we should have an outerlimits good service thread

Outer Limits 4x4 Board

i shat a turbo and put a hiflo garret on

i shat a turbo and put a hiflo garret on

Who is online