Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is this a good deal?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Is this a good deal?

Post by Tomo_89 »

Got quoted $3500 for a dts turbo fitted and tuned with pump tweak. The guy said it should get around 130rwkw. Does this sound right and is it a good deal? He also said that there wasn't any need to go as big as 3 inch with the exhaust and that 2 and 3/4 will do fine and give better torque at low revs.

Cheers
Tomo
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 93
Joined: Fri Mar 07, 2008 10:52 pm
Location: Boronia,Vic

Post by hjgq »

Mate if he's quoting $3500 for all that I would drive to Qld for that deal I was quoted 3g for a turbo and then another 3g for the pump tweak I would be asking if he was reputable/well known turbo guy
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

hjgq wrote:Mate if he's quoting $3500 for all that I would drive to Qld for that deal I was quoted 3g for a turbo and then another 3g for the pump tweak I would be asking if he was reputable/well known turbo guy
it depends on what a pump tweak is.
If its just adjusting the fuel mixtures then that isnt $3k worth.
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

if its a pump overhaul and boost compensator 3k sounds about right but 3k to do 1 half turn of a screw is bad..
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

macneil wrote:if its a pump overhaul and boost compensator 3k sounds about right but 3k to do 1 half turn of a screw is bad..
exactly.
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Re: Is this a good deal?

Post by sw1 »

Tomo_89 wrote: He also said that there wasn't any need to go as big as 3 inch with the exhaust and that 2 and 3/4 will do fine and give better torque at low revs.

Cheers
Tomo
if i were told that, at a place that i was looking at spending some descent $$$, i would be asking for proof. see some of his dyno readouts to prove that 2 & 3/4 is as good as 3.

i suspect its more the case of it easiest for him to do/prepare.

if you have a good read around on patrol4x4.com you would see that maximum kw paper figures arnt the be all and end all.
with a td42, low down torque it what its all about

have your read any of 'dzltecs' posts on this forum, hes got a pretty good idea what he is on about & going by one of his posts hes preparing a good off the shelf kit at moment
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Is this a good deal?

Post by bogged »

sw1 wrote:if i were told that, at a place that i was looking at spending some descent $$$, i would be asking for proof. see some of his dyno readouts to prove that 2 & 3/4 is as good as 3.
Denco when I went to their Wagga headoffice showed me some dyno sheets when I asked why their kits didnt come with 3in exhaust.
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Post by sw1 »

i suppose thats with their cast dump, just changing the pipe size. which i could understand making no difference

i suspect different dumps would make a difference tho
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sw1 wrote:i suppose thats with their cast dump, just changing the pipe size. which i could understand making no difference

i suspect different dumps would make a difference tho
yea some "3inch" dumps arent true 3inch right through eg not a mandrel bend.
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

It's being done by monster performance center in Mackay. He's done quite a few turbo diesels before with good results. Wouldn't tell me what they do to the pump.
He said you can use a 3 inch pipe if you want but there isnt much of a gain over the 2.75 and that you lose low down power.
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 111
Joined: Mon Aug 13, 2007 10:04 pm
Location: Perth

Re: Is this a good deal?

Post by madrolla68 »

Tomo_89 wrote:Got quoted $3500 for a dts turbo fitted and tuned with pump tweak. The guy said it should get around 130rwkw. Does this sound right and is it a good deal? He also said that there wasn't any need to go as big as 3 inch with the exhaust and that 2 and 3/4 will do fine and give better torque at low revs.

Cheers
Tomo
So by fitting a DTS turbo kit they are claiming 130Rwkw with just that and a pump tweak?????

Or is it a DTS turbo fitted to your already factory turboed engine with a pump tweak also.

MAtt
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Re: Is this a good deal?

Post by Tomo_89 »

madrolla68 wrote:
Tomo_89 wrote:Got quoted $3500 for a dts turbo fitted and tuned with pump tweak. The guy said it should get around 130rwkw. Does this sound right and is it a good deal? He also said that there wasn't any need to go as big as 3 inch with the exhaust and that 2 and 3/4 will do fine and give better torque at low revs.

Cheers
Tomo
So by fitting a DTS turbo kit they are claiming 130Rwkw with just that and a pump tweak?????

Or is it a DTS turbo fitted to your already factory turboed engine with a pump tweak also.

MAtt
Fitting new turbo. the one supplied in the mtq/dts kits. have absolutely no idea what he does on the pump he just laughed when i asked him...

Is it worth gettin an intercooler? how much more do you reckon that'd cost?

Cheers
Tomo
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

.

Post by cspgq »

iv just put a dts kit with 3 inch exhaust on my patrol the pump still needs a tune and iv got 110hp at the wheels. iv been told you can have them tuned to suit what you want. eg. horse power or economy. it is possible to get good power and torque out of them.
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Re: .

Post by Tomo_89 »

cspgq wrote:iv just put a dts kit with 3 inch exhaust on my patrol the pump still needs a tune and iv got 110hp at the wheels. iv been told you can have them tuned to suit what you want. eg. horse power or economy. it is possible to get good power and torque out of them.
what economy are you currently getting?
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

.

Post by cspgq »

not real good. it needs a good tune. i dont really no. sorry. im after hp not to worried bout economy. a person i no has got around the 180hp at wheels with this kit however there is NO economy. its a comp truck though so they not worried.
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

I'm currently gettin around 16l/100 with my N/A so i was hopin to stay around that mark
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

.

Post by cspgq »

i hope to get it tuned in next few weeks. will let u know what i get.
Posts: 105
Joined: Sun Nov 18, 2007 7:12 pm
Location: Dont no

Post by msjc38 »

Your mates in makay have got there hands on it.
There is no way a 10mm non boost compensated pump will deliver enough fuel to make 135rkw & if it did it would blow that much smoke you will be on the waiting list for a EPA notice. The DTS kits are very good but I think he is filling you full of shit or he has told you 3500 bucks to get you in & its going to 6500 to get your car out if its making 135 kw
Call Diesel tec & find out what they have to say.
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

msjc38 wrote:Your mates in makay have got there hands on it.
There is no way a 10mm non boost compensated pump will deliver enough fuel to make 135rkw & if it did it would blow that much smoke you will be on the waiting list for a EPA notice. The DTS kits are very good but I think he is filling you full of shit or he has told you 3500 bucks to get you in & its going to 6500 to get your car out if its making 135 kw
Call Diesel tec & find out what they have to say.
Have to agree with this. You wont see 135rkw for $3500. The 'pump tweak' will be no more than turning the screw. The price is OK but I'd be fitting an EGT gauge also to make sure he doesnt 'tweak' it too far..
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

so what sort of figures can be expected from this kit?
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Post by InSanE »

most aftermarket bolt on turbo kits get you around 90 - 100rwk at the max
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

so what sort of pump mods are needed to make 120kw+
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 59
Joined: Wed May 07, 2008 2:58 pm
Location: Melbourne

Post by Look'n 4 Mud »

I have the DTS/MTQ system installed on my TD42 and reckon it is great.

A mate also has it fitted to his and has just had his dyno'd and had the pump "tweaks" and got another 20kw out of it. but still only got to just under 100kw at the back wheels with 35's and 4.1 diffs. No intercooler.

Another friend has an 80 series with the same set up and it is all good guys.

I have had mine on for about a year and it is magic. Very tidy. Great system.

NOT A RACE CAR!!!!!

I have 35's and 4.6 diffs and will be going on the dyno in the next couple of weeks for a tweak.

I had the MTQ full 3" exhaust system fitted which is what they recommended and is fully mandrel bent from the manifold to the tip. Work of Art! comes with the pyro insert point ready to go.

The MTQ kit come with the first section of the exhaust as standard to the first flange anyway and it is in 3". Your man must get a good deal on a 2 3/4??????

$3500 is a good price for a good kit.

Pulls like a train.

I am here looking for a post i found here about 3 months ago with info on a water to air intercooler set up out of the USA...... Can anyone help me with a link to it??? cheers
Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests