Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8 valve clearence?
Moderators: toaddog, Elmo, DUDELUX
2.8 valve clearence?
Does anyone have a manual with the spec for the inlet and exhaust valve clearence on a 2.8(3l) hilux engine?.
Inlet .20-.30 mmm
Exhaust .40-.50mm
Although i will be very surprised if you need to change anything- my lux did 340,000kms on the 2.8D and the same shims it came from factory with were STILL in spec for valve clearance!
Exhaust .40-.50mm
Although i will be very surprised if you need to change anything- my lux did 340,000kms on the 2.8D and the same shims it came from factory with were STILL in spec for valve clearance!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Who is online
Users browsing this forum: No registered users and 0 guests