Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What would it take to fit 280/85 16(900mm diameter)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 57
Joined: Sun Nov 02, 2003 3:04 pm
Location: bind.tk

Contact:
Contact Jonathan Ferguson

What would it take to fit 280/85 16(900mm diameter)

Post by Jonathan Ferguson »

Silverstone MT 117?

Would 2" Back Space 16x8 Rims be enough to keep the Tyre from the Relay Rod?
Would cutting just the Lip from the front Guards be enough?
How much cutting in the rear Guards?
What else?
[b][i][u][color=Orange]LIFE AIN'T WORTH LIVING WHEN YOU DIE BEFORE YOU'RE MEANT TO![/color][/u][/i][/b]
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

how much lift do you have?
should be alright but if you still need more just play around with the bolts that adjust your steering stops on the back of the hub.
Top
Posts: 57
Joined: Sun Nov 02, 2003 3:04 pm
Location: bind.tk

Contact:
Contact Jonathan Ferguson

Post by Jonathan Ferguson »

how much lift do you have?
None
[b][i][u][color=Orange]LIFE AIN'T WORTH LIVING WHEN YOU DIE BEFORE YOU'RE MEANT TO![/color][/u][/i][/b]
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

ok, i put 35s on std had a fair bit of rub when pulling outta steep driveways, and all i did was 2 inch bodylift and it was fine. the front guards should give you bout 2.5 inchs if you cut them but the rear will need alot more than that. a mate could fit 36 swampers he had 2 inch spring 2 inch body. if thats any help to ya.
MaccA
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests