Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Brake Master Cylinder

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 18
Joined: Sat May 03, 2008 4:29 pm
Location: Sydney

Brake Master Cylinder

Post by aussydluke »

Hey Guys,

My brake light keeps coming on.. I have change the front pads and bled the fluid and it was ok for a couple of weeks and now the light is back on again..

Looks like a leak from the master cylinder... how much am I looking at to buy a new master cylinder and where should I look??

Thanks,
Luke
Top
Posts: 114
Joined: Tue Feb 12, 2008 10:22 am
Location: Toowoomba, Qld

Contact:
Contact DigitalStillPhotos

Post by DigitalStillPhotos »

Hi Luke, I had the master cylinder go on me a little while ago.. pretty sure it only cost something like $36 from repco... any parts dealer should be able to supply one for your car

Tim
The photographer formerly known as Digital Still Photos...

now active as Capture the Dog Photography 📸
Top
Posts: 39
Joined: Wed Aug 03, 2005 1:48 pm
Location: mansfield vic

Post by paulv1818 »

hi, i found that the float switch was sticking in mine. you could try giving it a bit of a clean. i just pushed it down a few times and that seemed to free it up.

if you know for sure that it is leaking then forget what i just said
cheers
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest