Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sydney Engineers Certs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Sydney Engineers Certs

Post by TheOtherLeft »

Does anyone know of any engineers in the Sydney region that can look at pop-top conversions of 4WDs?

I'm getting the list from the RTA but as I understand it most engineers specialise in certain areas only.
Top
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Post by TheOtherLeft »

Has anyone dealt with Richard Grdusiak in Penrith or Peter Gillard in Leichhardt/Canterbury?
Top
Posts: 36
Joined: Thu Oct 05, 2006 8:25 pm

Post by Bezman »

VSI 15 on the RTA website (is for unrestricted signatories) has been pulled by the RTA at the moment as they they are removing some engineering signatories for various reasons, there is still a list of restricted signatories available on the RTA site. Both engineers mentioned are on the unrestricted list, with the second one mentioned, work category as passenger car and light commercial vehicles up to 4.5 tonnes. Both should be able to engineer what your asking.
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

www.consulmotive.com.au

John varetimidis in Mortdale is the man to see.
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Richard Grdusiak in Penrith

Goooooonnnnnnnne, Dont know where. He did alot of cars. Including a stock civic.... :roll:
I am Tim
Top
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Post by TheOtherLeft »

BlueSuzy wrote:Richard Grdusiak in Penrith

Goooooonnnnnnnne, Dont know where. He did alot of cars. Including a stock civic.... :roll:
I just got back from Richard Grdusiak's. He's pretty friendly but charged a lot more then expected. Plus it takes a couple of days to get the new compliance sticker thing :x

I think he's moved since quite a few people can't seem to find him. He's between the Caltex Servo and John Cootes Carpets, on the cnr of Castlereagh St and Coreen Ave, Penrith
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests