Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need transfer gears fitted

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

need transfer gears fitted

Post by meads02 »

I had someone lined up to fit my new 4.16 gears but he is a bit reluctant to give it a go. Is anyone here keen to fit them for me? I'd have a go myself but I really have no idea what i'm doing. :lol:
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Re: need transfer gears fitted

Post by mud4b »

meads02 wrote:I had someone lined up to fit my new 4.16 gears but he is a bit reluctant to give it a go. Is anyone here keen to fit them for me? I'd have a go myself but I really have no idea what i'm doing. :lol:

do you have a full bearing and seal kit? if so i will fit them. have you had the case apart yet? just sometimes you need the idler shaft and thrust washers also.

cheers mark
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

I bought a rebuild kit with the gears from locktup4x4. I haven't had the case apart yet. where can i get these parts? i might as well get them as well
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

the kit consists of 2 gaskets, 3 seals and 5 bearings
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

meads02 wrote:the kit consists of 2 gaskets, 3 seals and 5 bearings
too easy, that's the usual basic kit and most of the time really all you will need.. when did you want it done by?

cheers mark
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

oh sweet. i'd like it to be done asap but whatever suits you. thanks
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

PM sent
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Seriously why rob yourself of money, I'd never done it before and it was easy with instructions

http://www.trail-gear.com/tech/zuk65gears/index.html

Buy a bearing puller from super cheapy and get some pipe off cuts from somewhere and roberts your fathers brother.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 148
Joined: Wed Apr 23, 2008 5:26 pm
Location: Narangba

Post by meads02 »

i'm not very competent when it comes to mechanical things. mud4b said he can do it and he's not that far from me so i'll see what happens
Top
Posts: 179
Joined: Sat Jun 14, 2008 9:43 pm
Location: Shidney

Post by RockHopper »

Got my gears, got my bearings, got my press, all I've got to get now is time. :roll:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest