Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hot reseting of leaf springs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 255
Joined: Mon Jan 21, 2008 2:22 pm
Location: Brisbane

Hot reseting of leaf springs

Post by Bruceh »

Does anyone know anywhere in Brisbane where I can get leaf springs hot reset? I have what I think is a good setup on our Zook but the rear springs are now starting to sag a little. Not real fussed on cold reset.
Thanks :cool:
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Don't know about a hot reset, but I got a set reset by Bayside springs quite a while back. They heated (tempered) them AFTER resetting. They have held their shape well.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

http://www.carrolls.com.au/ .... ;)
[color=green]Vote Earth[/color]
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

There is a spring joint on Abbestford road under the ICB. I have no idea what they do or if they are any good, I just drive past them everyday.

I myself just cold set springs in my press, have done so for years. Some last at that height for years, others will sag again quickly.

I have to do my passengers side front on Saturday as I bent the bottom 2 leaves in the pack a few weeks ago and the whole pack has since sagged :roll:
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

Guts wrote:There is a spring joint on Abbestford road under the ICB. I have no idea what they do or if they are any good, I just drive past them everyday.
mayne spring works.. been there.. would probably recommend carrolls at wacol over mayne anyday..

i went to mayne spring works with some custom springs for my 40 and they weren't very keen to help out.. did what I asked though..

the guys at carrolls were a bit more receptive and have a bigger setup then mayne.. not sure if mayne would do the hot resetting..

i got quoted 75$/pack if i remove them from the vehicle but that was a normal reset not a hot one.. that said the height they did set has held for 2yrs now.. (or maybe it was my leaf spring selection? :)
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 255
Joined: Mon Jan 21, 2008 2:22 pm
Location: Brisbane

Post by Bruceh »

Thanks guys, Looks like some phone calls coming up. :lol:
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest