NOOB QUSTION
The ones on the flywheel ,or the one on the pulley as their seems to be a bit of variation. Between the two around 2 deg diffrence
Regards
james
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
WHATS THE BEST TIMING MARKS
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
WHATS THE BEST TIMING MARKS
slugs are just snails that sold their belongings for drug money
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Best way to be sure is to find TDC on No1 (top dead centre).
To do this remove No1 spark plug and wind engine over till a timing mark lines up, then insert a thin piece of wood or a knitting needle or similar (not a dirty old screwdriver as it may scratch the bore) and rock the engine until the stick reaches its upper most point.
This will be "true TDC" then you will know which mark is correct.
(I'd use the flywheel)
Jas.
To do this remove No1 spark plug and wind engine over till a timing mark lines up, then insert a thin piece of wood or a knitting needle or similar (not a dirty old screwdriver as it may scratch the bore) and rock the engine until the stick reaches its upper most point.
This will be "true TDC" then you will know which mark is correct.
(I'd use the flywheel)
Jas.
Who is online
Users browsing this forum: No registered users and 0 guests