Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

swb into a lwb

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

swb into a lwb

Post by short stuff »

im looking at putting 300mm of 100x50x3mm rhs and fish plates on either side of the extension on the end of my chasis to make it into a lwb and moving the springs back to the lwb position does any body know some good engineers
Top
User avatar
St Jimmy
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

Talk to pryo he's doing the same thing :cool:
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Look around for a LWB chassis, I think Steve or Craig (ZOH) had some lying around
;)
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

is that ozook steve

if i was going to change to lwb i would be looking for a 1.3 model chasis
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

auszook Steve, yep, pretty sure they were 1.3's
;)
Top
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

ive extended a swb chassis by 900mm its a lot of work cause the swb chassis tapers out and you have to bend the rails to make the parallel. plus the lwb has another brace underneath.i also would suggest finding a lwb chassis.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

I got my BARE LWB body and chassis off Ebay for $100.
No way I'd try to extend a SWB for that kind of money! :D

Jas.
Top
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

I can't foresee any problems of squaring off the extension from the end plate. Other than spacing between spring mounts if you are moving them a hell of a long way back...
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

about 300mm back so ill need to move leaf perches which isnt that bad and also put 100x6mmx300 fishplates should be strong enough ill find an engineer to sus it out
Image
Image
Top
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

S

Post by Pyrotech »

boner59 wrote:Talk to pryo he's doing the same thing :cool:
i was going to do this, but iv picked up a LWB chassis for $200, so i opted to go this way, as it will be a heap less work
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest