I bout a 75 series with an after market security system thing and the installation looks like a heap of spaghetti. I want to rewire the whole thing, hidden, away from the ignition barrel and solder, not tape.
There are heaps of wires coming out of the unit but not all are used. It has central locking on the 3 doors, immobiliser, the hazards go birko when I open a door and I believe there is an alarm but I heard it briefly today for the first time ever, it sounded like a cat being strangled and isn't very loud. The only brandname I can see is SPACEKEY... lol
So are the wiring diagrams fairly similar, if so have you got one?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Alarm, Imobilisor, Locks diagram
Moderator: -Scott-
if it was me, id piss the immobiliser and alarm off and fit a new one, maybe an OEX or vision are ok, depending on what you want it to do and how much u wanna spend you'l be looking at maybe 100-300 bucks.
mount it under the dash somewhere on the drivers side where it will fit, you said you want it away from the ignition barrell but you may have to extend wiring depending on where you can find space to mount the module.
hook the central locking up into that and fit a new siren under the bonnet coz yours sounds like its carked it.
the new immobiliser will come with a wiring diagram and the old immob. should be fairly self explanitory when you look at the wiring and use a test light. use the old immobilisation points, they should be easy to find if you follow the wiring and the indicators, accessories, ignition etc. using a test light or multimeter.
you will need to find out how the central locking is switched, you may need to throw a few relays in there but if its an aftermarket job id imagine it will hook up to the new immobiliser pretty easy.
hope this is helpful.
Presto
mount it under the dash somewhere on the drivers side where it will fit, you said you want it away from the ignition barrell but you may have to extend wiring depending on where you can find space to mount the module.
hook the central locking up into that and fit a new siren under the bonnet coz yours sounds like its carked it.
the new immobiliser will come with a wiring diagram and the old immob. should be fairly self explanitory when you look at the wiring and use a test light. use the old immobilisation points, they should be easy to find if you follow the wiring and the indicators, accessories, ignition etc. using a test light or multimeter.
you will need to find out how the central locking is switched, you may need to throw a few relays in there but if its an aftermarket job id imagine it will hook up to the new immobiliser pretty easy.
hope this is helpful.
Presto
im surrounded by money pits
Who is online
Users browsing this forum: No registered users and 0 guests