Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bucket seats
bucket seats
hey guys i want to put bucke seats in my zookilux i was thinking the full plastic seats the proper seats water an mud wont matter than really just after different ideas an oppinions cheers
if you like uncomfortable, hot and slippery eats then go for it. Pulsar seats seem to be a goer by some people or some of the other racing seats. biggest problem is space to fit them and the mounting of them. Do a bit of a search as there's quite a few threads with a variety of different seats used
Ransom note = demand + collage
swift GTI seats are easily adapted with some ally tabs on the rails. its a tight squeeze but can be done in a weekend if you gots da toolz.
Skippy
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'
http://www.newflavour.com/
--------------------------------------------------
skippy wrote:swift GTI seats are easily adapted with some ally tabs on the rails. its a tight squeeze but can be done in a weekend if you gots da toolz.
Skippy still exists.... amazing...
As for the seats besides width make sure if going racing bucket style seats that you watch for the shoulder supports also as they usually are too big or come very close to the b pillar..
cheers mark
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
VT Commodore seats fit you have to re-drill the base for the suzuki rails (fitted to the farm hack LWB)
with a bit of fiddling honda prelude seats fit but the rails need some custom work to work correctly (i fitted them to hilux/serria buggy im building) as well the honda seats are really well bolstered and comfy to sit in all day
cheers hope it helps if i go to the farm on the weekend i will snap some shots of the commo seats
with a bit of fiddling honda prelude seats fit but the rails need some custom work to work correctly (i fitted them to hilux/serria buggy im building) as well the honda seats are really well bolstered and comfy to sit in all day
cheers hope it helps if i go to the farm on the weekend i will snap some shots of the commo seats
rear quarters are evil and must be punished with rocks
wow - i thought you were like, dead or something =)skippy wrote:swift GTI seats are easily adapted with some ally tabs on the rails. its a tight squeeze but can be done in a weekend if you gots da toolz.
but back on topic:
im using generic race seats in mine - vinyl wrapped and a steel frame under the padding, so the supports dont flop about like the foam only ones... theyre very comfy and a bit of water doesnt really bother them.
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 2 guests