contrary to popular belief, a SOA doesn't gain you a stack of height - what you do get is massively improved articulation, better ride, and loads of under-axle clearance. doing it right means using a flatter spring pack (by resetting your existing, or using 'tired' stocker springs), and consider a front shackle reversal - not essential but further improves approach angle and bump absorbtion.
a properly set up SOA shorty will only sit about 4" over standard, but the offroad benefits go much further than simple clearance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Now let me get someething straight...
Moderators: toaddog, Elmo, DUDELUX
dumbdunce wrote:contrary to popular belief, a SOA doesn't gain you a stack of height - what you do get is massively improved articulation, better ride, and loads of under-axle clearance. doing it right means using a flatter spring pack (by resetting your existing, or using 'tired' stocker springs), and consider a front shackle reversal - not essential but further improves approach angle and bump absorbtion.
a properly set up SOA shorty will only sit about 4" over standard, but the offroad benefits go much further than simple clearance.
wow
that sounded very professinal, thank you very much 
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
That looks to me, althought the photos are not very clear, it looks to be a very rare, and seldom seen vehicle in Australia. Toyota produced that ANIMAL for only around 2 or 3 model years, and only 5 exist in Australia.
They are known around Sydney as a "BIG GAY FUN TRUCK" very handy for use as floats in the mardi gras and other homosexual activities, particularly back seat sausage hiding (at least that is rumours I have heard)
The shorty can benefit tremendously from a spring over with a shackle reversal, a few inches of wheelbase and some 60 series diffs. I would have dumbdunce do it for you. But buy my wider diffs to put under it.
Dont call a SWB or MWB cruiser a bundy, or a bundera, im sick of it, they are totally different rigs. If it has the 6cyl 3F ill bet it goes alright!!
They are known around Sydney as a "BIG GAY FUN TRUCK" very handy for use as floats in the mardi gras and other homosexual activities, particularly back seat sausage hiding (at least that is rumours I have heard)
The shorty can benefit tremendously from a spring over with a shackle reversal, a few inches of wheelbase and some 60 series diffs. I would have dumbdunce do it for you. But buy my wider diffs to put under it.
Dont call a SWB or MWB cruiser a bundy, or a bundera, im sick of it, they are totally different rigs. If it has the 6cyl 3F ill bet it goes alright!!
hands and mums dont count!!!
bj on roids wrote:dumbdunce wrote:book it in for next week then eh?
I would be there saying make the studs bigger, and make the car longer and wider and install some airlockers, and so on
hey all it needs is a spring over, lockers, and some 37's or bigger. The width and length are just how i like it! BTW you wouldn't just be trying to sell me your axles now eh?
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
droopypete wrote:+dj_hansen+ wrote:Someone must have badged you in the fad of 1998/2000 kool stealing car badges phase...
I am not certain of this but I think only the hard tops had this badge
I am sure someone will correct me if I am wrong.
Peter.
wrong all bundera's had bundera badges even soft tops.
Bundytime wrote:droopypete wrote:+dj_hansen+ wrote:Someone must have badged you in the fad of 1998/2000 kool stealing car badges phase...
I am not certain of this but I think only the hard tops had this badge
I am sure someone will correct me if I am wrong.
Peter.
wrong all bundera's had bundera badges even soft tops.
Bundytime, the badge we are refering to is the one on the bottom of the roll bar, do you think all bundera's, hard and soft top had this one?
Peter.
Hey, just spent a couple of days with my45 trying to cheer him up after rolling his 45, and decided to give the rig a rear springover. Looks great, only the front to go now, but that involves a little more money, honey.
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
4sum4 wrote:glen1n wrote:here we are, what ya think fellas?
Can you see at night with the lights angled down
yeah, but i had to adjust the spotties a little, so its fine now. Does anyone know how much (roughly) all the equipment would cost to springover the front also?
I'm a ChickenHawk, looking for a Chicken. Better go for cover when you hear my valves clickin'
Who is online
Users browsing this forum: No registered users and 0 guests