Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel Exaust Systems

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 79
Joined: Thu Oct 25, 2007 7:43 pm
Location: Hunter Valley

Diesel Exaust Systems

Post by 4x4 suzi »

Hi
i have a 97 2.8itd and am thinking about putting an exaust on it for better sound and maybe more power.. has anyone done this to theirs? how does it go and where did you get it done??
any advice would be appreciated
Top
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

hey mate,
it might be different but i put a new exhaust system on my 2.3TD... It was a 2 1/2 inch sports exhaust system, mandrel bent... It did sound good but only was loud under load.... Yes, it made the car have more power.... just depends because i paid $440 for mine in March this year and that was the cheapest...
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Top
Posts: 52
Joined: Wed Dec 12, 2007 8:05 am
Location: Edgeworth

Post by dig3283 »

lillford exhaust do great work guarenteed they will help you out they are at unit 1/28 glenwood dr thornton 49665699
Top
Posts: 79
Joined: Thu Oct 25, 2007 7:43 pm
Location: Hunter Valley

Post by 4x4 suzi »

hey thanks guys, will ring them today
anyone else got info relevant to size etc?
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

With a turbo, go for a good size system. If I bought a 2.8, the 1st thing would be a 3 inch exhaust from the turbo back with a couple of small mufflers, provide a bit of a bark but not a drone, the turbo does alot of muffling.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

A 3" system can be dear and a pain to fit. I do 2.5" for most things and that works well. A single straight thru muffler will usually be enough.
Then check your boost, factory 10psi, rule of thumb 10psi non IC 15psi with IC. Your blow off valve will release at 15psi which negates your gains so set it at 14psi. A pyrometer would be a wise accessory
Top
Posts: 45
Joined: Tue Sep 18, 2007 7:15 pm
Location: North Brisbane

Post by mattza13 »

What have people payed for exhaust systems? and does that include a new dump pipe?

and where do i get a pyrometer from?
Top
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

Mine is 2.5 inch press bend using orginal dump pipe and one muffler. Cost $175 not to loud but made a heap of difference especially in 3rd gear.
Top
Posts: 45
Joined: Tue Sep 18, 2007 7:15 pm
Location: North Brisbane

Post by mattza13 »

g hope i can find somewhere with a cost like that, the cheapest ive found is nearly 300 or 480 with a dump made to fit :?
Top
Posts: 79
Joined: Thu Oct 25, 2007 7:43 pm
Location: Hunter Valley

Post by 4x4 suzi »

fazza81, where did you get yours done for that price?
so 2.5" sounds the way to go ay.
with increasing the bost on the turbo, how do you do that? maybe i should leave that alone for now as i dont know how to do it...
Top
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

I have a 2.5" system (dump-back) fitted to my 2.8td, with a small straight through muffler at the rear. Ideally, you should have a new dump pipe made to reap the full rewards. Didn't notice much of a difference in performance, and the noise level is fine. For $250 I can't complain.
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Top
Posts: 212
Joined: Wed Jul 06, 2005 7:10 pm
Location: Perth, Western Australia

Post by HotAe92 »

4x4 suzi wrote:with increasing the bost on the turbo, how do you do that? maybe i should leave that alone for now as i dont know how to do it...
You need a manual boost controller and boost gauge. Although I fitted mine myself, I suggest you leave it to the experts to fit and tune. If you feed it too much boost under load, the EGT will soar and you risk doing some major damage to both the turbo and the engine.

Fitting a less-restrictive exhaust, in theory, should provide a small increase in boost without too much compromise.
'04 NP DiD Pajero: 2" Lift, 33's, ARB Bar, XD9000 Winch, Rear ARB Locker, Snorkel, Dual Batts and Much More...
Top
Posts: 44
Joined: Fri Apr 18, 2008 1:15 pm
Location: rockhampton

Post by fazza81 »

You can adjust the turbo boost by Boost controller or you can put washers on the wastegate.

I got my exhaust done in Rockhampton in QLD but most quotes I got were about $200 - $250

I picked up a 1-2 psi boost gain just with the exhaust.
Top
Posts: 45
Joined: Tue Sep 18, 2007 7:15 pm
Location: North Brisbane

Post by mattza13 »

i have just got back from contacting some more exhaust shops and they all are diffenrt on what exhaust i should get. one place is saying go for 3 inch, and th other is saying htat they must be on drugs putting a 3 inch on my lil 2.5td?? does anyone have any opinions or past experrience with this?

cheeers matt
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 17 guests