Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hot air

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 146
Joined: Sun Jul 13, 2003 3:01 pm

hot air

Post by marko »

:bad-words: I am currantly running a supercharger on my td42 engine.At first it was running 8lb,but now I have change the pulley system to a toothed drive belt and up the gearing.My problem is that it has increased the boost to 12lb. Now this making the air temp rise to 100deg c plus.Ive bought a intercooler of a rx7 series 5, Im going to top mount it with a gu scoop,the intercooler is 300mmx200mmx50mm.My question is will this size intercooler be big enough and what is the max air temp I can run into the engine safley.And wat is a safe boost pressure to run in "96" td42 engine
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: hot air

Post by bogged »

marko wrote:And wat is a safe boost pressure to run in "96" td42 engine



ITs hard to tell really, depends on the life of the car, klms, how well the engine has been cared for.. the strength should hold 12psi (if same as turbo @12psi should do it easy).

Have a look at www.are.com.au good turbo site, will give you some ideas on stuff...

GQ's are well known for overheating problems with turbo/blowers....
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

We ran our old TD42 at a constant 15psi all the time and when we stripped the engine down there was no sign of ware. During comps we often upped the booste to 20 - 21 psi with no detremental effect.
Joe.


To succeed, focus on the solution, not the problem.
Top
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

Nissan changed the TD42 piston specs in early/mid '96,(can't remember exact month) so you need to be more careful with EGT's.
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Drafty wrote:During comps we often upped the booste to 20 - 21 psi with no detremental effect.



If I ever see your car it will end up with a white stripe on it... :rofl:

20psi... :shock:

Petrol/diesel (cant remember)

Fuel aneroid?

Mark from ARB Sth (used to be) ran 20psi in his TD42, but I would hesitate going over 14psi for road work.
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Our old diesel is dead now, head on.

We were racing a 4.5L petrol GU on a beach in Tassie one time, couldnt shake him so we just upped the booste from the in cab controler to 21psi, certainly felt the increase in acceleration and left him in our dust.
Joe.


To succeed, focus on the solution, not the problem.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Drafty wrote:Our old diesel is dead now, head on.

We were racing a 4.5L petrol GU on a beach in Tassie one time, couldnt shake him so we just upped the booste from the in cab controler to 21psi, certainly felt the increase in acceleration and left him in our dust.


yea when mine went from 9-11psi the difference was HEAPS, going from 12-20 would have left you with testicles in the ears....
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Re: hot air

Post by CRUSHU »

bogged wrote:
marko wrote:And wat is a safe boost pressure to run in "96" td42 engine



ITs hard to tell really, depends on the life of the car, klms, how well the engine has been cared for.. the strength should hold 12psi (if same as turbo @12psi should do it easy).

Have a look at www.are.com.au good turbo site, will give you some ideas on stuff...

GQ's are well known for overheating problems with turbo/blowers....

do the petrol motor overheat as well? i have just bought a turbo kit for my petrol 4.2. i think it runs about 7lb.
Top
Posts: 389
Joined: Sun Nov 10, 2002 9:51 pm
Location: Melbourne

Post by LOCKY »

Oh Oh Stef.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: hot air

Post by bogged »

CRUSHU wrote:do the petrol motor overheat as well? i have just \bought a turbo kit for my petrol 4.2. i think it runs about 7lb.



The cooling system has to be spoton...

which system did u get?

8psi in mine we didnt notice $3000 difference.
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

vl turbo t03 supposedly with t04 internals, with extractor manifold, with bov etc. i run au thermo's on the radiator, so hopefully it will be ok. if it gets hot, it will be due to the poor unleaed fuel, so i can run methanol injection.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

AS I see it the temp is a relationship to fuelling on a diesel.

If you increased boost temp shouldnt rise.
If you increased fuel as well or are using an aneroid that adj fuel then it will get hotter.
You can back the fuel off and leave the boost alone.
Petrols run the other way, more fuel, colder combustion.

Bazzle
Top
Posts: 214
Joined: Sun Jul 06, 2003 4:02 pm
Location: WA

Post by Zac Zec »

where abouts are you guys getting the petrol turbo kits from? How much power increase are you getting for $3000. Im looking at doing a similar thing to mine.

Cheere :lol: :lol:
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Zac Zec wrote:where abouts are you guys getting the petrol turbo kits from? How much power increase are you getting for $3000.



Not enough to pay $3500 again..
Top
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Post by Drafty »

Asked my brother what we run, sits on 8 psi around town, 12psi when wheeling.
Joe.


To succeed, focus on the solution, not the problem.
Top
Posts: 214
Joined: Sun Jul 06, 2003 4:02 pm
Location: WA

Post by Zac Zec »

Where abouts did you get the kit from??? Would you be getting 200Kw at the flywheel. Does the kit include a chip for your computer or is it running on gas?

Cheers ;) ;) ;) :lol:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests