Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

auto 2 manual conversion

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 26
Joined: Sat Sep 29, 2007 12:56 pm
Location: MARYBOROUGH

auto 2 manual conversion

Post by DEZZA »

is there already a post on this???? i did search how much $$$$ we talking

i have a mwb landcruiser with a 13bt engin and a automatic box im running 33inch rubber its so slow im considering selling / have 3inch dumpipe and exhaust and no barwork to keep wait down


70L tank around 450-500ks

100km top speed on highway
50km top speed on beach (when not bogged) about 16 psi
climbing sand dunes not possible

would a manual box improve these figers


cheers any info good info
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

Changing diff ratios could be an option.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

i'd say your engine isn't puttin out of you can't get it over 100kph. might wanna have the injection pump checked out. does it blow much smoke? direct injection motors (factory turbo motors) need to have the injectors in top shape too
Posts: 26
Joined: Sat Sep 29, 2007 12:56 pm
Location: MARYBOROUGH

Post by DEZZA »

ive had the injectors out and cleaned so they should be right

and it does blow a bit of smoke, someone also suggested i get the injection pump tacken out and tuned,


also suggested my 3inch exhaust is 2 big and should drop it back to
2 1/4 inch
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests