Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
As above...?
Looking at a new roof lining for a ute. Nissan is only marginally more expensive than having one trimmed up. And i think it would be a better option as you know what your gunna get.
There is only one motor trimmer in the area and I have heard a few mixed reports.
Ni$$ans price is $560 with everything included, bars etc.
Trimmers price is $380-$550. got to supply bars and don't have all the other little bits.
it used to be the case that OE parts were far more expensive and that included servicing but these days they have to be competitive to survive.
Now I ring the dealer for prices and then ring aftermarket suppliers so I can make the comparisons. You also have to examine the quality of what you are getting as some non OE parts are just cheap imported junk so cheaper isnt always the best in the long run.
at those price differences, I would buy the OE part, at least you know if it doesnt fit or is faulty in some way that you will have someone to fix it, try geting the local guy to fix something....most times it just wont happen.
i needed to buy a 100amp fuse for the charge circuit if i went through nissan it would have cost me $42 plus a 2 day wait autobarn had them for $6 there and then i was discusted with nissan.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
blackmav wrote:As above...?
Looking at a new roof lining for a ute. Nissan is only marginally more expensive than having one trimmed up. And i think it would be a better option as you know what your gunna get.
There is only one motor trimmer in the area and I have heard a few mixed reports.
Ni$$ans price is $560 with everything included, bars etc.
Trimmers price is $380-$550. got to supply bars and don't have all the other little bits.
you are getting seriously ripped with the hoodlining for a ute ( from the trimmers)
Cheers,
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Yep. Thats why I'm thinking a factory one would be just as good and probably better quality.
The problem is that there is only one motor trimmer down this way.
Its a bare shell so taking it to Sydney isn't really an option.
