Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60's centre into 45 rear diff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 407
Joined: Wed Mar 30, 2005 4:01 pm
Location: browns plains

60's centre into 45 rear diff

Post by Matt_88 »

had some carnage on friday night and smashed my rear diff.. am getting a rear 60 series diff and i am just wanting to make sure that it will fit..

i have 4.11's in the front should they be the same?? what ratio's do 60 series run??

should it bolt straight in with same flanges for tailshaft??


cheers
matt
NECKUPYAPARROT4x4

Tosa_03

Proudly sponsored by and part of:-

Tosa Racing Co.
Top
Posts: 273
Joined: Tue Jul 01, 2008 3:52 pm
Location: GREENBANK

Post by AZZA'S HJ47 »

it will fit i think that they cam with 4.11 in the 60's though
Top
Posts: 156
Joined: Tue Sep 27, 2005 7:23 pm
Location: Dandenong ranges

Post by Dyna Beast »

Flanges are the same too.
Hybrid rover ute. Isuzu diesel. Custom suspension. Winch. Snorkel etc. etc.
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Post by jessie928 »

will bolt straight in,.

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

flange

Post by Wozza244 »

Just a personal experience, i bought a 45 series diff centre for my 60 and the flanges were different and what a prick of a job undoing the pinion nut!
Get out there!!
Top
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Contact:
Contact pcman

Post by pcman »

if its from a 1980+ fj45 its the same as a 60 if its earlier you will need to change the pinion or driveshaft flange
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

Its the same axles and bolt pattern.

May need a tailshaft, but thats dependant on the year.

You can get an adapter, and you cant get flanges that are circular and have both bolt patterns drilled onto them.

Or swap the flange, do it up FT though.... don't want that chit comin off.
hands and mums dont count!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 33 guests