Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Questions about radius arm spacers on GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 41
Joined: Wed May 14, 2008 7:58 pm
Location: Gippsland/Traralgon

Questions about radius arm spacers on GQ

Post by Ash.brown »

Firstly, Ive made up a set of spacers myself and have made them 20mm think. is that too thick/will they work???
and
what is the best thickness to have??

has anyone made up there own spacers and what did they use???
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Questions about radius arm spacers on GQ

Post by bogged »

most seem to say 12-15mm is plenty
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

if you take the springs out so you can move the susp thru its full travel, with out it hitting anything. Then there shouldnt be an issue.
As bogged said most seem to do 12-15mm.
THOUGHT FOR THE DAY....
Posts: 41
Joined: Wed May 14, 2008 7:58 pm
Location: Gippsland/Traralgon

Post by Ash.brown »

Thanks for the advice guys
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Ash.brown wrote:Thanks for the advice guys
Just don't tell anyone.
THOUGHT FOR THE DAY....
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Check how much thread you have left at the chassis end of the radius arm with the 20mm spacers. I could only fit 15mm spacers before I ran out of thread but they are not standard arms.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 9
Joined: Wed May 21, 2008 8:53 pm
Location: Tasmania Greater Hobart

Post by Grinbuilt »

I could only fit 11mm spacers safely to my standard arms before running out of thread.
Posts: 41
Joined: Wed May 14, 2008 7:58 pm
Location: Gippsland/Traralgon

Post by Ash.brown »

looks like i'll have to take the nut and bush off and do some measurements then. :shock:
Post Reply

Who is online

Users browsing this forum: No registered users and 96 guests