Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gti Q
gti Q
Quick question. Whats an early model GTi 1.3 twincam motor worth?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
motor money
i bought a mark II complete car for $1500
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
if you want to rebuild it $200-400 in redline... ussually $600+ for a low k or 'freshen up'
some of the very riced out ones go for above $1k but they are high rpm knife edge powerbands that guzzle petrol
some of the very riced out ones go for above $1k but they are high rpm knife edge powerbands that guzzle petrol
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Theres one on ebay for $999 but its missing the air flow meter. Just priced one thru suzi sport and they are $450 second hand and $1800 new so I don't think its worth it for that price 
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Is it for a sierra ?
I am not convinced that this is a great motor for a Sierra due to the stuffing about with dizzy adapters.
For $1800 I would be looking at 1.6's or G13BBs (Jimny donk) or similar.
I am not convinced that this is a great motor for a Sierra due to the stuffing about with dizzy adapters.
For $1800 I would be looking at 1.6's or G13BBs (Jimny donk) or similar.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
have u actual look at what's involved in the angle drive adaptor.. i am shore i could make it.. or at least the drawings to get it made..
here is one.. that's it.. no castings etc... how hard can that be to make??
here is one.. that's it.. no castings etc... how hard can that be to make??
[quote="jessie928"]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
If I were you I'd get a MK2 or 3 GTi motor and not an early MK1, I have the MK1 and you cannot do any of the any mods to them without getting an aftermarket ecu. The MK2/3's can be chipped for easy HP gains and to suit mods like SR20 throttle body and cam changes etc.
If I were made of money I'd get a series 2 and put some midrange cams in it, SR20 throttle body and chip it for 8250 RPM limit, this combo would provide more power than a sierra would ever need.
If I were made of money I'd get a series 2 and put some midrange cams in it, SR20 throttle body and chip it for 8250 RPM limit, this combo would provide more power than a sierra would ever need.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
I was always under the impression that the 1.6 16v head was actually a better head than the GTi unit with better flow velocities at lower RPM and far better suited to a 4wd or daily driver.
The GTi head may be better for overall HP.
The GTi head may be better for overall HP.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
There is a bit of a difference between the what you think something is worth and what it costs.jonno_racing wrote:have u actual look at what's involved in the angle drive adaptor.. i am shore i could make it.. or at least the drawings to get it made..
here is one.. that's it.. no castings etc... how hard can that be to make??
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 1 guest