Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

uni joints????

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

uni joints????

Post by spzook »

does anyone know if sierra's have different sized uni joints in the drive shafts throughout production?
cheers.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

i have seen external and internal clips used but same size uni for WT and NTs
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

bursons told me that there are three different sizes listed and i had to pull one out to match up.
but ive been too lazy to do it even though i know one front one is on its way out ;)
could be bullshit though from some pimple faced 17 year old school dropout at bursons
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

i just swaped a 1ltr transfer end onto a 1.3 wt jack shaft. you just have to use the right caps as the wt has external clips and 1 ltr has internal clips.

both caps fit in both holes just can't put the clips on if its the wrong one.
cheer up emo kid
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Post by spzook »

ta thanks guys!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest