Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

12H-T that won't rev?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

12H-T that won't rev?

Post by turbo4t »

My HJ61 has some issues. Seems to be starving for fuel. No air leakage but just won't rev hard. Takes ages to get up to 80KPH and crawls up hills at 40 or so. Motor has done 228K and is in great condition. I have done the filter and checked the inline gauze in the pump inlet. Any ideas?
Top
Posts: 175
Joined: Mon Apr 28, 2008 9:10 pm
Location: imbil

12h-t

Post by 60_series_united »

when i done my body lift i craced the pipe going from the air box to the turbo intake.. so i taped it up and when it got to 2500rpm it just died and the boost gauge went into vacume so i changed the pipe and it was fine so it was just starving for air.. i donno if this will help
cheers tyson
seirra, ute chop, air locked 60 series diffs, 4-link rear, 3 link front, 35's,18" fox air shoxs, h.i.d's, 6hp high mount,
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Re: 12h-t

Post by turbo4t »

60_series_united wrote:when i done my body lift i craced the pipe going from the air box to the turbo intake.. so i taped it up and when it got to 2500rpm it just died and the boost gauge went into vacume so i changed the pipe and it was fine so it was just starving for air.. i donno if this will help
cheers tyson
Thanks for the reply. I changed that pipe last week as mine was also cracked. I just replaced my fuel filter again and it's going up hills at 100 again. Must have been some serious crud pumping through it or a dodgy filter. I do use a bit of festy old fuel from wrecks every now and then. I will hope for the best.
Top
Posts: 82
Joined: Tue Mar 27, 2007 4:34 pm
Location: Wilton

Post by TURBO60 »

what pipe are you guys changing the rubber or the ally cross over pipe
hj75 2h turbo intercooled twin locked longfields 35s
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Drain your seperator.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

TURBO60 wrote:what pipe are you guys changing the rubber or the ally cross over pipe
Just the flexible rubber one.
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

joel HJ60 wrote:Drain your seperator.
Don't have one.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 17 guests