Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ gearbox seals, where to source?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

MQ gearbox seals, where to source?

Post by pongo »

i was told that i have to go genuine by CBC but was hoping some one knows a different story

i need a full set for a 5speed box and tranfer as well as the PTO if possible

anyone got any ideas?
Top
Posts: 186
Joined: Wed Aug 30, 2006 3:06 pm

Post by Chook350 »

cbc were able to get seals for my 4speed a couple of years ago, but frm memory i had to get sum from nissan, best way is to take ur id od n depth measurements and take that to cbc n they should be able to source for ya, hope that helps
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

from memory the front one is a standard size - the thickness may vary a mm or two but id and od are std, i think the rear had to come from nissan.
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Get some gasket paper and cut em yourself ! ( cheapest option )

everything else from Nissan or a reputable ( large business) bearing supplier.


Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

V8Patrol wrote:Get some gasket paper and cut em yourself ! ( cheapest option )
Hold on are you talking shaft seals or yea, as kingy mentioned gaskets, i assumed the input and output shaft seals...
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

You need bot Gaskets & Seals when rebuilding an MQ/MK box

Gaskets = cut em

Seals from Nissan or major brearing supplier.
( take the old seals with you when ordering em.... ;) )

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest