Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

link for mods in darwin

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 96
Joined: Sun Aug 13, 2006 8:56 pm
Location: Brisbane

link for mods in darwin

Post by kond »

AS stated just after a link for modifactions allowed in Darwin NT ie suspension lift how high tyre size is an x-link ok . Any help would be graet
Cheers
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

http://www.nt.gov.au/transport/mvr/vehi ... ndex.shtml
Ransom note = demand + collage
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

They seem to be following NCOP already so its 50mm for 4WD tyres. That explains why there are so many lucky b*stards driving around up there on 35' rubber.

http://www.infrastructure.gov.au/roads/ ... _ncop.aspx
GU Patrol with go better bits added
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

it 4 inch combined lift, so 2 inch lift 35's are ok but if you have say 2 inch sus, 2 body and 35, then no not legal up. however you do not need an engineer for basic modifications, just TAC approval.
MUD, MUD, GLORIOUS MUD!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests