Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1uzfe conversion to GQ manual

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 33
Joined: Mon Dec 03, 2007 9:49 pm
Location: Brisbane

1uzfe conversion to GQ manual

Post by pro093 »

what bellhousing did people use when putting the 1uzfe in
front of the GQ 5 speed
do you have to make one or can you by them off the shelf
thanks
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 1uzfe conversion to GQ manual

Post by bogged »

search for a thread by Bubs.... hes done a couple of these, but was couple yrs ago, think it was custom.. lots of the job was.
Top
Posts: 1
Joined: Sat Jul 05, 2008 4:34 pm
Location: sunny coast

Post by pinkbitz-v8-coily »

Give Shuka a call..he runs a twin turbo 1uzfe in his patrol..he can help u out with the conversion and costings. His phone no. is 0422742284.
Glenno :cool:
FatMaxx Mufflers and Auto
Top
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

I used the standard GQ bellhousing with a 10mm adaptor plate.

Simple to make, bulletproof and cost effective.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 31 guests