Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How long will a Zook last?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 20
Joined: Thu Oct 30, 2003 2:04 pm
Location: Bathurst

How long will a Zook last?

Post by Courtancer »

My 83 Sierra is just about to pass 200,000km. How long should you expect an engine to last? At the moment it doesn't really use much oil or blow much smoke. When they go, can you feel they're on their way out for a while or can it be really sudden?
No Signature
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

When i was shopping for a sierra a while back a fellow i called up had one for sale with 298,000 clicks on it... he reckoned it was still going a treat.

On the other hand, my previous engine starting smoking a lot and it only had 170 thou on it... That engine was still running like that for a long time (i.e. i got a few months out of it when it was a bit smokey), so it cetainly wasn't a sudden stop.

Droopy Pete had a piston (correct me on terminology here pete) punch through the block of his 1600 Vitara engine. But it would still drive (roughly) to get him back to civilization..

Hope that gives you an few ideas.

Cheers
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Re: How long will a Zook last?

Post by bigsteve »

Courtancer wrote:My 83 Sierra is just about to pass 200,000km. How long should you expect an engine to last? At the moment it doesn't really use much oil or blow much smoke. When they go, can you feel they're on their way out for a while or can it be really sudden?


How many of the 200,000 have you put on it, generally if you treat a piston engine with TLC and keep it tuned, lubricated and drive it gently (Normally) most engines should do 300,000 IMO
(Except anything made in europe)
yeshemesh
Posts: 20
Joined: Thu Oct 30, 2003 2:04 pm
Location: Bathurst

Post by Courtancer »

Thanks for the quick replies. Thats exactly what I wanted to hear.
No Signature
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Courtancer wrote:Thanks for the quick replies. Thats exactly what I wanted to hear.


Another happy customer :)
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Courtancer wrote:Thanks for the quick replies. Thats exactly what I wanted to hear.

My engine had 210 thousand and was still going strong when I sold it.
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:My engine had 210 thousand and was still going strong when I sold it.


and at least 10 of those 210,000kms were spent driving on its side ;)
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:
bigsteve wrote:My engine had 210 thousand and was still going strong when I sold it.


and at least 10 of those 210,000kms were spent driving on its side ;)


Thats corret, and it never missed a beat (Or a hole to fall in)
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:Thats corret, and it never missed a beat (Or a hole to fall in)


Or log to climb :D
DMA Founding Member #1 - Now Retired
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Post by Gutless »

A mate of mine hit 320K before his started getting smokey, so if you look after it, you should get a while yet.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

And i'd imagine that you will clock up more k's if you are only using the car for on-road driving... i.e. taking it offroad and filling the engine with dust, mud, water etc will surely shorten its life.
DMA Founding Member #1 - Now Retired
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

my first motor in my 1litre lwb didnt smoke, use oil or rattle. but it was very low on compression, and slowly got more and more gutless. was still drivable when I changed it, but only on the flat :)) christover.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Any engine if maintained properly should wear gradually. It won't go BANG all of a sudden unless you do something to make it fail :twisted: Like rev its ring off cold or cook it.

It will get gutless and use oil as rings wear and compression goes down and get to the point where it don't have the balls to push the rig along anymore. Then you put in a bigger one :armsup:
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

greg wrote:When i was shopping for a sierra a while back a fellow i called up had one for sale with 298,000 clicks on it... he reckoned it was still going a treat.

On the other hand, my previous engine starting smoking a lot and it only had 170 thou on it... That engine was still running like that for a long time (i.e. i got a few months out of it when it was a bit smokey), so it cetainly wasn't a sudden stop.

Droopy Pete had a piston (correct me on terminology here pete) punch through the block of his 1600 Vitara engine. But it would still drive (roughly) to get him back to civilization..

Hope that gives you an few ideas.

Cheers


The main reason my 1600 spat a rod is S3 rockhopper and 5.125 diff ratio's, 100 KM's @ 4500 RPM is not good for longevity :cry:
I need twin cases/Thorax/KluneV4.1, something.
Peter.
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

droopypete wrote:I need twin cases/Thorax/KluneV4.1, something.
Peter.


Sure you do pete ;)

I think we all need those things too :)
DMA Founding Member #1 - Now Retired
Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests