Hi
At work so not much net time , so have not had a deep look for answers . Need some answers in a bit of a hurry .
Looking at Samurai coil axles and set up for another 4x4 , it would be a light duty 4x4 , a shine truck .
Questions , are the coil samurai axles wider that the leaf samurai axles ( you guys refer to as wt ). Also if they are longer are they weaker , like the jimny axles ? If they are the same can they get the h/duty axle in them ? i think they have the odd diffs in them , as in the front is a mid pinion thing , would look at dropping them out .
Cheers
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Samurai Coil diffs ?
Width depends on which type of coil diffs you get.
Axles are similar to Jimny.
Bigger CV's can be fitted to newly made up heavy duty axles.
Yes they have a high pinion front.
The solution to making them fully usable and strong is to get 2 new front axles made. Cost is not that great.
You may never break anything either.
Axles are similar to Jimny.
Bigger CV's can be fitted to newly made up heavy duty axles.
Yes they have a high pinion front.
The solution to making them fully usable and strong is to get 2 new front axles made. Cost is not that great.
You may never break anything either.
Who is online
Users browsing this forum: No registered users and 110 guests