Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting new turbo HELP.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 401
Joined: Mon Jan 15, 2007 10:03 pm
Location: Wagga NSW

Contact:
Contact Fmx_Aus

Fitting new turbo HELP.

Post by Fmx_Aus »

Just put a new T70 on the car. All hooked up. Primed it.

But it keeps pissing oil out of where the feed line going into the top of the turbo. Got me stuffed what it is. Is there something inside the turbo that need to be opened??

Any help would be great.


:cry: :cry: :cry:
Top
Posts: 401
Joined: Mon Jan 15, 2007 10:03 pm
Location: Wagga NSW

Contact:
Contact Fmx_Aus

Post by Fmx_Aus »

Thanks for the move.

Seems the intake wheel isnt spinning, therefore not pushing the oil through the turbo :?:
Top
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Contact:
Contact cooter

Post by cooter »

there wasn't a plug jammed down the feedhole was there?
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Top
Posts: 401
Joined: Mon Jan 15, 2007 10:03 pm
Location: Wagga NSW

Contact:
Contact Fmx_Aus

Post by Fmx_Aus »

Nah mate no plug in there.

Got me stuffed :oops:
Top
Posts: 77
Joined: Sat May 06, 2006 1:42 pm
Location: kurri kurri

Post by bludger »

got any pics
turbo 60 series,soon to be locked
go the 40

[url]http://www.allaussie4x4.com/forum[/url]
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

is it a "Monsta/Ebay Turbo"?
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 292
Joined: Wed Jan 11, 2006 11:49 am
Location: Seville Vic

Post by MICK77 »

There should be a copper sealing washer on each side of the union the engine oil enters the turbo. If one is missing the union bolt may bottom out but the union will not seal against the turbo housing thus resulting in a oil leak.

As stated above pics would help a lot.

Micko
[quote="bogged"]
Whats that old saying that I've modernized for this scenario
"fuked over once, shame on her, fuked over twice, shame on me."
(c) Bogged 2008[/quote]
Top
Posts: 401
Joined: Mon Jan 15, 2007 10:03 pm
Location: Wagga NSW

Contact:
Contact Fmx_Aus

Post by Fmx_Aus »

Yep after talking to a few people the copper washers might be the problem. I have both of them, but they are a little worn.

So will get some tomorrow and try them out.

Not sure on brand mate, come as a spare with the car a while back.

Image

Image
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 121 guests