I have finally seen out on the road the other day the perfect snorkel. It was the Airtec on a R9 2.8 diesel Rodeo.
Usually snorkels for the Rodeo come all the way along the guard and enter right beside the headlight, which in my opinion look rather poor.
Just wondering if anyone has one of these and can show the entry point into the engine bay. I want to see if it could be customised to fit a V6 model of the same R9 shape.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Airtec snorkel on 98+ diesel Rodeo.
Moderator: Moderators
Timbo,
Do not have one but having seen a few other airtec's, they have a pipe that runs inside the guard (between the guard and engine bay) from the outer snorkel body that exits in the same spot as the air filter in the diesel.
Effectively the same as the safari but just on the inside. Spose what i am trying to say is that the entry point into the engine bay is probably going to be the same.
I have the Safari and it exits smack back level with the air filter inlet.
Cheers
Rainsey
Do not have one but having seen a few other airtec's, they have a pipe that runs inside the guard (between the guard and engine bay) from the outer snorkel body that exits in the same spot as the air filter in the diesel.
Effectively the same as the safari but just on the inside. Spose what i am trying to say is that the entry point into the engine bay is probably going to be the same.
I have the Safari and it exits smack back level with the air filter inlet.
Cheers
Rainsey
2in body lift, 2" supension ,33" BGG Muddies, rear ARB Air locker... still scraping the ground!
theRobdog, what does it look like? Is it really long and travels the length of the front guard?
This is the one I've been wanting to source. Then custom fit it for the V6.
This guy had to modify the outer skin on the MU guard to get it to sit flush, so it should fit the Rodeo no worries, its just the internal piping I'm not sure of.
This is the one I've been wanting to source. Then custom fit it for the V6.
This guy had to modify the outer skin on the MU guard to get it to sit flush, so it should fit the Rodeo no worries, its just the internal piping I'm not sure of.
Timbo,
Mine runs down the side to the front and yeah I agree it looks pretty average.
I wanted to do what you plan on doing but I have my dual battery right there where the charcol canister (i have relocated it to the drivers side) used to be and its very tight. maybe if you relocated the radiator tank you might be able to plum it up but I found the snorkel has quite a large diameter (almost 100mm).
as for putting it under the guard, it a good idea but again I think the diameter is to large and reducing it is another issue I wouldn't want to take on.
I would be interested to see how you go.
Cheers
Robbo
Mine runs down the side to the front and yeah I agree it looks pretty average.
I wanted to do what you plan on doing but I have my dual battery right there where the charcol canister (i have relocated it to the drivers side) used to be and its very tight. maybe if you relocated the radiator tank you might be able to plum it up but I found the snorkel has quite a large diameter (almost 100mm).
as for putting it under the guard, it a good idea but again I think the diameter is to large and reducing it is another issue I wouldn't want to take on.
I would be interested to see how you go.
Cheers
Robbo
Who is online
Users browsing this forum: No registered users and 0 guests