Hey all,
One thing I have found with putting bar work, sliders, rear shelving and ... oh... 33's on the Rodeo is that she just does not stop like she used to. More noticable when i swap from the 31's to the 33's.
Have toyed with the idea of a MU or early Jack rear axle with disks but these are as rare as rocking horse fodder. Other than this is there any known tweeks to the braking system to improves its stopping. I have noticed the type / brand of disk pad makes a big change, i.e. going with softer pads.
Ideas like renewed brake lines, new rotors yadda yadda...
Cheers
graham
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Improving braking efficieny on Rodeo
Moderator: Moderators
Improving braking efficieny on Rodeo
2in body lift, 2" supension ,33" BGG Muddies, rear ARB Air locker... still scraping the ground!
Larger disc's and calipers on the front will help as well as "sticky" pads. I think some late Jacks and the RA's have larger front brakes and they should fit straight on but you might need 16" rims.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Who is online
Users browsing this forum: No registered users and 2 guests