Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dana 44 front diff in shorty nh paj

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 85
Joined: Fri Dec 21, 2007 5:59 pm
Location: nw coast tas

dana 44 front diff in shorty nh paj

Post by 95shorty »

i was talking to a bloke at work and it turns out he has a spare dana 44 dront diff assembly sitting about, he also said it has a vacume operated diff lock aswell. sooo i was wondering if it would be a good setup to use in my shorty for the sas??? please help
95 swb 3.0v6 paj, lifted,34 simex jt2, twin locked, custom sliders, manual hubs, hi-mount which, sas comin
Top
Posts: 194
Joined: Sun May 11, 2008 12:30 am
Location: Manila, Philippines

Post by monmendoza »

check the model year of the dana 44, you might need to reverse the pumpkin, also make sure that you have the same gear ratio front and rear. In general Dana 44's is a good upgrade for SAS. There are also alot of aftermarket components in the US. Good luck. :)
Top
Posts: 193
Joined: Tue Nov 13, 2007 7:11 pm
Location: NZ

Post by WACKO »

if everthing is right... dooo eeettt!!!
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
Top
Posts: 85
Joined: Fri Dec 21, 2007 5:59 pm
Location: nw coast tas

Post by 95shorty »

yeah hopefully the diff center is on the passengers side and if all looks good then ill buy it. but im unsure of width and other things like that
95 swb 3.0v6 paj, lifted,34 simex jt2, twin locked, custom sliders, manual hubs, hi-mount which, sas comin
Top
Posts: 85
Joined: Fri Dec 21, 2007 5:59 pm
Location: nw coast tas

Post by 95shorty »

turns out the diff is no good, how about a set of gq patrol diffs would they go any good underneath????
95 swb 3.0v6 paj, lifted,34 simex jt2, twin locked, custom sliders, manual hubs, hi-mount which, sas comin
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Too big and heavy and still wrong side.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Top
Posts: 555
Joined: Fri Aug 03, 2007 11:10 pm
Location: port melbourne,vic

Post by flexytj »

you can pick up a hpd30 out of an xj dirt cheap or even a lpd30 out of a tj but the lp isnt as strong
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest