80 series 4 inch lift - how high does it sit?

[mudspinner]

any one know how high an 80 series with 4" springs should sit?
how do you know how much above standard your vehicle is sitting?

[Weiner]

4" higher then standard I'd say.

Measure distance from ground to guard breofr and after?

[mudspinner]

ok thanks,
maybe I need to be plain obvious, what is the total height.
i.e when messurded from the top of a rim to the guuard (with flares) what is that distance.

[rezpkt]

Hi

Have a read through this thread;
http://www.offroad80s.com/how-high-is-y ... lit=height

These measurements are from center of hub to bottom of wheel arch flare.

We can all approximate our lifts from the figures below; I gathered these numbers from the previous posts.

Stock:
Front 520mm - Rear 525mm

2inch Lift
Front 560mm - Rear 570mm

4inch Lift
Front 645mm - Rear 670mm

6inch Lift
Front 690mm - Rear 725mm

Have fun.

[Remydog05]

Thanks rezpkt

Good info and reading

[mudspinner]

good info! thanks will see what my rig is sitting at now...

[crustybj60]

thanks for that rezpkt!

just stumbled across this post.

pure gold.

crusty

Hi

Have a read through this thread;
http://www.offroad80s.com/how-high-is-y ... lit=height

These measurements are from center of hub to bottom of wheel arch flare.

We can all approximate our lifts from the figures below; I gathered these numbers from the previous posts.

Stock:
Front 520mm - Rear 525mm

2inch Lift
Front 560mm - Rear 570mm

4inch Lift
Front 645mm - Rear 670mm

6inch Lift
Front 690mm - Rear 725mm

Have fun.