Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What TBI is this?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

What TBI is this?

Post by smileysmoke »

hi guys i have a TBI kit in the garage that i figured i should get into and strip the loom
i have the entire loom from fusebox to ecu and coilpack/ignitor, throttle body, manifold, sensors and so forth.

Image
Image
can take more pics if need be.

cheers guys.
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

What's the P/N on the ECU?
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

The numbers on it are:
33920-81C10
E2t42#71 T
3803 X1
DOM-MT

heres a pic just in case i wrote it wrong:

Image
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

hmmm i dare say it might be off some sort of mitsubishi.

:lol: :finger:
All the gear, No idea...
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

haha thanks Dee.. but as Fords have mitsubishi alternators etc.. i hope to christ the same goes with the zooks. ha
found a samurai inlet gasket which looks very similar to my intake manifold pattern Image

ECU codes: http://bbs.zuwharrie.com/content/topic,50379.0.html

Going bye that link the closest i could find is as follows:
94 Samurai ECM number 33920-81C30
95 Samurai ECM number 33920-81C30

maybe its off a yank zook or a jappa import?
Last edited by smileysmoke on Tue Nov 18, 2008 3:44 pm, edited 1 time in total.
Top
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

Ok, it's obviously a Mitsubishi ecu, unfortunately that doesn't help a lot as they were used on several makes including zooks, hyundai, mazdas and amazingly, mitsubishi.



If I had to guess it would be the TBI from a Swift G16, but I can't be sure. Sorry.



If it makes you feel any better they wrote EPI in the exact same way as on yours. :finger:
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Top
Posts: 578
Joined: Fri Feb 15, 2008 9:07 am
Location: st hellens

Post by jonno_racing »

give it to me... i will sort it out for you
[quote="jessie928"]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

jap 1.3 efi.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

Post by suzimad »

its off an american samurai 90-95 sj413 group index E03,33,63
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

cheers for the replies guys. so its efi not tbi? it looks like only a single injector at the throttle body but i havent really had a good look.
so that being said anyone know what wiring diagram to work off? :D
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

efi..tbi.....tomato....tomato....yes its electronic throttle body injection...
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

smileysmoke wrote:cheers for the replies guys. so its efi not tbi? it looks like only a single injector at the throttle body but i havent really had a good look.
so that being said anyone know what wiring diagram to work off? :D

www.suzukiinfo.com
Should be some wiring diagrams for the TBI setup here.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

had a reply or two on zuwharrie.com:

SKYHIRANGER said: It should be like any other samurai EFI conversion (you are just using "foreign" parts....which are not really foreign to you)....remove the old wiring harness, swap the new one in, swap intakes, swap distributors, add a fuel pump, add the VSS to the speedo. No cutting, splicing, etc. of the wiring harness should be necessary.....at least that is how I did it when I swapped the samurai EFI onto my 87 samurai.


what do you guys reckon? not a bad idea as i already have the loom there etc. would be a mission pulling the dash out etc but probably worth it for a neat end result.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

sounds ok.

is loom from a RHD or LHD?

i was thinking this for when i did my vit one but the a/c, fan and lights controls were all off.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

good point didnt think of that.. ill lay it out in relation to the fuse box and see how it looks. worse comes to worse ill just have the 'new' fuse box on the passenger side and wiring it into the current loom.
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

i think Joe is on the money. its more than likely a Jap 1.3 efi setup.. as the US wiring diagram i have doesnt match up. colour codes seem to differ.
laid it all out on the garage floor and it looks to be for a RHD zook. it is missing a few plugs here and there that i can tell so may just strip the loom and splice it in for power. keeping the fusebox for future accessories etc.
if anyone has diagrams for the jap model feel free to lob em my way.. i will keep hunting in the meantime.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

I found that even though the colour of the wires was different, the acutal pin-out from the ECU was pretty much the same on most of the setups i have dealt with. Might be worth checking with a multi metre and see how close it is.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

ta Layto, ill try work out the wiring and make up my own wiring diagram for future use. may help once in the beast.
will get the multimeter onto it and take it from there.
thanks again!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 67 guests