Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ls1 engine pix

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 24
Joined: Wed Nov 27, 2002 6:19 pm
Location: Melbourne Aust

ls1 engine pix

Post by patrolnut »

just looking for pix of the front of a ls1 engine. i am trying to work out where all the pulleys and alternator ect go. can anyone help me out?

thanks in advance
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

http://images.chevyhiperformance.com/th ... otor_z.jpg
Try that one.

Tip: Have Google, will travel. ;)
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

disregard that pic, the alternator is mounted low on the passenger side, and there is other suttle differences. What are you looking at with respect to the belts?
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

matto wrote:disregard that pic, the alternator is mounted low on the passenger side, and there is other suttle differences. What are you looking at with respect to the belts?
http://www.modernracer.com/member/membe ... sides2.jpg

This one?
Top
Posts: 24
Joined: Wed Nov 27, 2002 6:19 pm
Location: Melbourne Aust

Post by patrolnut »

thanks a lot guys thats the one
Top
Posts: 751
Joined: Wed May 21, 2003 11:33 am
Location: Melbourne, AUS

Contact:
Contact FireTruck

Post by FireTruck »

Lots of info (if you search) right here... and you can join and ask Q's as well.

http://www.ls1.com.au
www.TeamFireBug.com

Thanks to:
abt4x4.com - Just Customs
Staun beadlocks - Solid Axle
Cummins - Maxxis
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

are there pulley's that get the aircon compressor at the bottom on the passenger side?? and the alt high on the drivers side, in a similar position to the way its set up on a Ecotec V6 ??

Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

like this but mirrored

Image

Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

not from what i have seen there is a mod to get the aircon up high on the drivers side from castle auto or marks adaptors make a remachined bracket so it sits about 6mm closer to the engine.
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

matto wrote:not from what i have seen there is a mod to get the aircon up high on the drivers side from castle auto or marks adaptors make a remachined bracket so it sits about 6mm closer to the engine.
Hmmm, I am looking at putting the L76 6lt crate motor in that I have sitting in the shed to replace the V6, I was hoping to keep the aircon compressor where it is so I dont have to get new lines made and regas it
Hoppy
[quote="RAY185"]Oh, and being able to lick your eyebrows is a sure way into a womans "heart". ;)[/quote]
Top
Posts: 283
Joined: Fri May 20, 2005 1:55 pm
Location: maitland

Post by matto »

are the aircon compressors the same because if there different you might have trouble, pirtek can make flexible hoses and a regas should only cost $100 plus a filter dryer
nissan 98 gu 5" lift 37 creepys, 80%reduction gears, front locker and a gen3 and no money.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 101 guests