Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Winch mounting frame ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 129
Joined: Sun Sep 28, 2003 8:07 pm
Location: Rockhampton QLD Australia

Winch mounting frame ?

Post by Dick »

I have a TJM bar and am about to fit a winch. It appears I need a frame to mount the winch to the chassis rails and not the bar. The bar is compatible (has cut outs etc) but requires this "frame" any idea what one looks like ? $350 to buy, possibly I could build something. Any pics would be appreciated .. thanks
05 Patrol GU ST Ute
3" lift, 3" exhaust, custom Garrett BB Turbo and top mount.. and electric mirrors !
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

Basically its a piece of 10mm or 12mm plate thats bolts between your chassis and bull bar mounts and the winch sits on it and bolts down onto. when i bought mine 2 years ago it was only $220 from memory
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests