Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Anyone used a Rear disconect from a frontier/MU/Isuzu etc?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Anyone used a Rear disconect from a frontier/MU/Isuzu etc?

Post by andrew e »

Frontiers, Vehicross and some other Isuzu platform cars use a disconnect in the long front axle next to the diff to engage and disengage 4wd. They can be opperated with vaccume or compressed air (low preassure).

I have one which i took to bits (will post photos up soon) and i am debating if the locking gear is strong/wide enough to use as a driveshaft disconnect. Has anyone used one before for this?

Andy
Top
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

No but wouldn't mind some pictures.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Top
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Contact:
Contact me3@neuralfibre.com

Post by me3@neuralfibre.com »

Surf has one too


Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

And Gen 2 Pajero onwards.

Front axle receives more torque than driveshaft, so I would expect a front disconnect to cope with driveshaft torque. However, in the front axle application the disconnect doesn't move with suspension cycling - I don't know if this would make a difference?
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

does any one have a picture of these things?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

very similar to the toyota ADD system, which has was in use from 1989-2005 when the new D4D lux's went to a permenantly engaged front end.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

Image

Image

Image

Image


Image

Image

Image
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

DUDE! Clean ya carpet! :D
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

disc

Post by Webbie »

farck yer where and how much are these suckers worth ANYONE, cheers
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

:cool: might have to start looking for one
[color=green]Vote Earth[/color]
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: disc

Post by Mr DJ »

Webbie wrote:farck yer where and how much are these suckers worth ANYONE, cheers
around $350 - $400 for complete front diff (no CV's), but should be able to get the ADD part a lot cheaper as when 7.5" centre craps itself it's cheaper to buy a new complete diff than new C&P.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

They're used on later model Jackaroo's and Rodeo's as well. Instead of manually locking the front hubs the hubs are permanently in and when 4wd is selected the vacuum operated actuator slides the collar across to connect the front axles to the diff. They play up a fair bit too eg: sticking on or off or slow to work and they must be well sealed units.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests