Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
the basic off the shelf DBA rotors you buy are made overseas, just like RDA and most of the other brands.
Theres very little difference between them all.
I just did the GQ. Paid $426 for front and rear rotors and pads. I didn't do the front rotors yet as I haven't had a decent enough beer supply. Took about 30 minutes all up, stuffing around as well.
Was able to manipulate pistons back a bit by hand. Just had to watch the fluid level in the engine bay. Took about 30 min all up with some stuffing about. DIdn't bleed the brakes as they didn't need it.
