Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Boost gauge noise?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Boost gauge noise?

Post by ISUZUROVER »

Installed a VDO 0-30psi boost gauge on a TD.

When off boost (and also slowing down) I get an internal rattle/ticking in the gauge. When accelarating (and boost is climbing) or sitting at a steady speed then it goes away.

I think that it must be engine noise being transferred through the tube??? Anyone else had this?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 11
Joined: Thu Dec 16, 2004 5:31 pm
Location: VIC

Post by Manky »

Yep, mine does the same. Like you i guess it's either engine noise or pressure pulses vibrating the inside of the gauge.

I have heard you can get a restrictor or something to put in the line and stop this but have no other info. I'll be interested if anybody has a fix cos it's pretty annoying but i'm slowly learning to ignore it.

Dave
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

You using copper tube or plastic?
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

mike_nofx wrote:You using copper tube or plastic?
Plastic - VDO kit.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 82
Joined: Sun Jun 04, 2006 5:12 pm
Location: Illawarra, NSW

Post by BEU77y »

I think you'll find the gauge is trying to go into negative (vacuum) territory. Our Cruiser used to do the same thing.
After improving the air intake piping it stopped doing it. If you've got any way of getting the motor to breathe better, K&N, bigger pipes etc, try that.... or a fully sik boost gauge that does positive and negative.....
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

The problem you have is common with VDO boost gauges. Put a restrictor in the line and it should fix the problem. Should be able to pick one up from repco.
GU Patrol with go better bits added
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

I had/have the same issue.
I soldered up the hole in the brass fitting for the boost line(the fitting that goes into the intake crossever pipe) then drilled it out again with 1mm drill bit. Reduced the problem a lot but still does it when I back off the throttle and engine decelerates after being at full boost.

Was really loud initially, but is much quieter and I hardly notice it when it does it now.

Gauge still responds quickly to changes in boost.

I just figured it was pulseing of air pressure through the line? Oxy/acetyline(sp?) guages do the same thing at high flow rates too.

before and after
Image
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

80's_delirious wrote:I had/have the same issue.
I soldered up the hole in the brass fitting for the boost line(the fitting that goes into the intake crossever pipe) then drilled it out again with 1mm drill bit. Reduced the problem a lot but still does it when I back off the throttle and engine decelerates after being at full boost.

Was really loud initially, but is much quieter and I hardly notice it when it does it now.

Gauge still responds quickly to changes in boost.

I just figured it was pulseing of air pressure through the line? Oxy/acetyline(sp?) guages do the same thing at high flow rates too.

before and after
Image
THANKS!!!
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

no worries ;)
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I was to lazy for anything like that .. I zip tied an old neoprene stubby holder around the back of mine ..

Shut it up enough so I could not make it out over the myriad of other noises the dudlux made.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Maybe try a few drops of blinker fluid...
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

BEU77y wrote: K&N, bigger pipes etc, try that.
Post of the week for mentioning K&N in an ISUZUROVER thread as a solution :rofl:
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 214
Joined: Fri Jul 16, 2004 10:23 pm
Location: Brisbane, Aus.

Post by barbz »

the VDO gauges normally come with an inline restrictor that goes into the brass fitting in the gauge.

Or you can try a plastic dial from a fish tank that will limit flow.

With boost you are measuring pressure not flow so you dont need to worry about how restrictive the fittings are.
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

Gwagensteve wrote:
BEU77y wrote: K&N, bigger pipes etc, try that.
Post of the week for mentioning K&N in an ISUZUROVER thread as a solution :rofl:
:D
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

What others have said, an inline restrictor fixed mine when it made the exact noise you've described. The local vdo dealer gave one to me.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests