Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help! Jimny Auto hubs not locking in....

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Help! Jimny Auto hubs not locking in....

Post by Mud Toy »

Hey guys Went for a wheel the other day and got stuck in 2wd and went to engange 4wd and had no drive to the front wheels, the transfer is engaging the front drive shaft and the front axle shafts are spinning, The hub is just not locking the shaft to the disc hub. I can hear a small vacum at the hub when removed, and the 4wd light is coming on and not flashing. Any ideas guys? Or link to a thread that would, i have looked high and low...
Top
Posts: 45
Joined: Sun Dec 03, 2006 9:36 pm
Location: Darwin NT Australia

Post by chuckwilltalk »

is this who i think it is? haha
Image
04 SR5 3.0TD Dual Cab Hilux
3"dump, 2.5" pipes, MTZs, Hella Ralley 4000 HID

www.DARWIN4x4.NET
Top
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Post by Mud Toy »

Would it be any other? lol
I cracked it, im buying manual free wheeling hubs...
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

some handy info !

you can use sierra free wheeling hubs, all you have to do is take out your bearing locking rings and cut/ machine off the automatic hub guider thing.

there is like a thin ring thats probly 25mm deep thats part of the bearing locking ring and it stops the sierra hubs from going on.

thats it all done !
Top
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Post by Mud Toy »

Cheers man, yeah i was looking at that, was just looking for one that adapted to the ring but i may just cut it off....
Top
Posts: 24
Joined: Mon Mar 24, 2008 11:05 am
Location: Darwin N.T

Post by Mud Toy »

Will more then likely modify mine (cut guide ring off) but does any body know of any Free wheeling hubs you can purchase to fit straigh to the jimny as i have to buy a new set either way?
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

No and sierra aisin hubs are the strongest hubs money can buy anyway.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests