Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Will 33s rub with 2 + 2 Lift Hilux Ln106r

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 36
Joined: Wed Dec 19, 2007 4:21 pm
Location: Brisbane

Will 33s rub with 2 + 2 Lift Hilux Ln106r

Post by Turboln106r »

Will 33s rub with 2 + 2 Lift Hilux Ln106r on full compression.
Top
Posts: 10
Joined: Tue Dec 02, 2008 12:44 pm
Location: Vancouver, BC Canada

Post by Gavman »

For me yes but only a wee bit when turned and compressed in the front... Not huge by any means though
Top
Posts: 36
Joined: Wed Dec 19, 2007 4:21 pm
Location: Brisbane

Post by Turboln106r »

thats good to hear, i bent the gaurd a bit with only 2 inch body and sagged springs, it was really bad.

I just wanted to no if 4 inch total was enough and whether id need shackles
Top
Posts: 342
Joined: Wed Dec 06, 2006 6:09 pm
Location: Sunny Coast

Post by jonamaphone1 »

ive got 2inch springs and moved my diff forward 35mm and it rubs a little on full flex and full steering lock. 33 x12.5inch width. 10.5s wouldn't rub at all.
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

mine wasnt too bad just caught plastic inners but got deeper offset on rims and it improved it a bit.
still stuff em into the guards but thats my fault and prob wouldnt happen under "normal 4wd conditions" :twisted:
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 70
Joined: Fri May 11, 2007 4:26 pm
Location: Central Coast, NSW

Post by Brainless »

Mine scrubb on hard lock when compressed up and im running 3+3
87 Hilux SingleCab Project - 3rz, 35's 3inch Spring, 3 inch Body, GB Lift
88 Ford Mav, 4inch Spring, 3inch Body
Top
Posts: 188
Joined: Wed Dec 10, 2008 7:49 pm
Location: Blackburn

Post by cmarico »

Mate I was running 33's with no lift - in fact some sag, and with some panel beating she was fine except full lock left where it would hit the steering arm.

Now have 2" Suspension lift only and she hasn't hit a thing.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 105 guests