We need some 2" wheelspacers to suit a Range rover for Sams new buggy. Does anyone in Aus stock these new or does anyone have a set we can borrow for this comming weekend. We dont have time to get some custom wheels made and spacers will get us out of trouble this weekend.
Can anyone help us out please?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
BEG BORROW STEAL some rangie wheel spacers.
Moderator: Micka
Strange Rover wrote:Or does anybody have any really good booty fab ideas on how to make some 2in wheel spaces. I think Ive thought of most and the best one is to put the wheels on backwards with a couple of washers in there as well.
But I would really like to buy some 2in spacers (like tomorrow).
Sam
booty fab idea - weld 2" longer bolts to existing studs
and then put heapsss of washer in behind the rims 
or
couldn't you change the offset of yr rims?
TD5 96 Discovery UTE.
mickrangie wrote:booty fab idea - weld 2" longer bolts to existing studs
Been there and done that one on the D44s on the original rig when the 42s first went on
This will be driven a little harder than that so we dont want to risk it.
We could change the offset but just dont have time. We have too many other things to do and only have 4 days.
Any small engineering workshop could easily turn these up!
It would take them no more than 2 hours.
The hardest part would be finding someone to do them straight away!
Even if you get them to face of the material and spot drill, it would not be to hard to drill it out. Just need a couple of bigger drills!
Also if you know of a workshop that would allow someone to use a lathe and a mill i could easily do it in a couple of hours!
OR
If you buy some decent tooling for that little lathe i could turn them down (just need some billit steel), mark the p.c.d and drill them from there.
I see you have a boring bar out there already!
It would take them no more than 2 hours.
The hardest part would be finding someone to do them straight away!
Even if you get them to face of the material and spot drill, it would not be to hard to drill it out. Just need a couple of bigger drills!
Also if you know of a workshop that would allow someone to use a lathe and a mill i could easily do it in a couple of hours!
OR
If you buy some decent tooling for that little lathe i could turn them down (just need some billit steel), mark the p.c.d and drill them from there.
I see you have a boring bar out there already!
Cheap way to go about as well:
1. Go to Dunken Doughnuts
2. Get a Dozen GLAZED Doughnuts
3. The Have to be GLAZED
4. Eat 2 each ( 12-(2x2)=8)
5. Day after ("Day 2"), repeat step 4 ( 8-(2x2)=4)
6. Day 3, by now the 4 remaining doughnuts would be ROCK SOLID, and the GLAZING part would have helped in that.
7. Use above mentioned as wheel spacers!
(Note: the above mentioned is NOT waterproof and may deteriorate with any liquids...particularly coffee)
1. Go to Dunken Doughnuts
2. Get a Dozen GLAZED Doughnuts
3. The Have to be GLAZED
4. Eat 2 each ( 12-(2x2)=8)
5. Day after ("Day 2"), repeat step 4 ( 8-(2x2)=4)
6. Day 3, by now the 4 remaining doughnuts would be ROCK SOLID, and the GLAZING part would have helped in that.
7. Use above mentioned as wheel spacers!
(Note: the above mentioned is NOT waterproof and may deteriorate with any liquids...particularly coffee)
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
DiscoDino wrote:Cheap way to go about as well:
1. Go to Dunken Doughnuts
2. Get a Dozen GLAZED Doughnuts
3. The Have to be GLAZED
4. Eat 2 each ( 12-(2x2)=8)
5. Day after ("Day 2"), repeat step 4 ( 8-(2x2)=4)
6. Day 3, by now the 4 remaining doughnuts would be ROCK SOLID, and the GLAZING part would have helped in that.
7. Use above mentioned as wheel spacers!
(Note: the above mentioned is NOT waterproof and may deteriorate with any liquids...particularly coffee)
mmmmm - think I might have to start with more donuts than that!!
Sam
Got it sorted - just going to run some smaller tyres. Borrowed some 38X12.5 R15 TSLs from Greg (aka 1madengineer) ehich is good cause this the the sized tyre I was origionally wanting to run. Good thing too because the transport company has somehow lost my custom inner axles so that I carnt run my longfields. So Im just picking up a couple of brand new 110 CVs. So they should cop the 38s for a while.
Sam
Sam
Strange Rover wrote:Good thing too because the transport company has somehow lost my custom inner axles so that I carnt run my longfields. So Im just picking up a couple of brand new 110 CVs. So they should cop the 38s for a while.
Sam
I see you are a gambling man
The Lucas motto: "Get home before dark."
beg borrow steal some wheel spacers
Snake Racing advertise them on their web site
"What !!!!! Not another bloody Landrover"
wheel spacers
rovacraft in perth w.a. stock spacers not sure
how big though ones i saw were about 30-40mm
how big though ones i saw were about 30-40mm
rover money pit on mogs !!!
Who is online
Users browsing this forum: No registered users and 0 guests