Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lpg turbo question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2
Joined: Sat Dec 13, 2008 3:15 pm
Location: brisbane

lpg turbo question

Post by munro1656 »

hi all

I'm new to forum I have a question i drive a 4.2 patrol petrol/lpg I am in process of building new engine and am turbo charging it my question is in regards to lpg mixer I don't think I can install it after turbo due to the pressure differences ofbetween boost and mixer so can it be run on vacum side (in front) of turbo the car will be dyno tuned when all fitted

cheers craig
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

You have to blow through if you plan to intercool, you can't have a intercooler full of LPG on the front of your car. The converter needs the same boost reference and it all works.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

yep you put your mixer after the turbo, and then from the pressure side run a reference hose into the converter this will let it run in both vacuum and boost....very easy, you don't want to do suck through for heaps of reasons one which Joel has already mentioned.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 2
Joined: Sat Dec 13, 2008 3:15 pm
Location: brisbane

Post by munro1656 »

I'm guessing I have to run boost into converter then if I understand correctly were would I have to run a reference line into converter is there a fitting a can go into

cheers craig
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

on most converters on the top cover there will be either a bung or boss where you can run a hose into from either the cooler pipe or just pressure side of the turbo somewhere, I guess its relevant to ask what converter and mixer your using, you haven't mentioned here or in the PM.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 19 guests