Hi guys,
sorry couldnt find it any where "I know you've heard that a million times"
Im puting a 1.6 carbie vit motor into my 1.3 sierra.
Im about to put it in, but found it has different plugs and I dont know what to do...do I just make it run and disreguard all the plugs im affraid it will run ruff as the wiring runs to the carbie.
any help will be much appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 carbie vit motor into sierra wiring
There is a fair bit of meat there (mostly in the alloy housing bit) that needs to come out. about 1/2 cmBibbZ wrote:How much do I need to grind off the 1.3 starter motor to fit it on the 1.6 motor
The way I have done it in the past is to grind a bit, color it in with a white board marker and refit, The whiteboard marker comes of easy to show you exactly where it is hitting. Grind, mark repeat until no more marker comes off.
Cant recall much on the wireing for the carb etc sorry.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
http://www.outerlimits4x4.com/ftopic109435-0-0-asc-.php
I had some troubles with my sierra wiring it up, but NIK came to the rescue!
hope this helps you
I had some troubles with my sierra wiring it up, but NIK came to the rescue!
hope this helps you
Who is online
Users browsing this forum: No registered users and 25 guests