Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ diff qtn

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

MQ diff qtn

Post by get it up there »

hey peoples!! My mate has a 85 SWB mq, and has a slight prob!! His drivers side wheel is leaning in at the top.. shit loads!! First thing we did was check the king pin bearings and the wheel bearing.. their all fine. We are starting to suspect a bent diff housing. Looking at it, it seems near impossible to do.. cause if it is bent, it has somehow bent the shortest section!! (the shorter axle tube). Is this a common prob?? And if it is, any solutions on strenghtening it for the future.. cause i read on here that they have got cast housings?? Thanks heaps!
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

put it on a wheel alignment machine, see how far inwards it's facing (get a camber reading)
1988 351W GQ wagon
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

Surely it cant be out of allignment by that much?? Its got a fair old angle on that wheel!
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

do it so you can get a measurement of the camber angle, then you can investigate further what the issue might be
1988 351W GQ wagon
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 7 guests