Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Building the perfect 75 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 100
Joined: Tue Mar 09, 2004 7:56 am
Location: Northern Gold Coast

Building the perfect 75 series

Post by Fishin' Dave »

Planning a ground up build of a 75 series, what bits would you include / modify? Not a comp truck, just for Fraser Isl

Rear diff/axle out of a ? - I've heard there are better options than the standard

Front diff / axle out of a ?

Brakes ?

Extra long range tank to combat the price of fuel on the Island

Big lift to get the sump above the wheel ruts

Staun bead locks of similar to prevent rolling a tyre off the rim

Ideally a gal chassis and fibreglass body?

I'll be starting the project early in the new year - still looking for a starter vehicle.
Any suggestions for mods / things to include would be appreciated.

Dave
80 series Extra Cab - a work in progress.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

80 series sahara chassis, 75 series body!
hands and mums dont count!!!
Posts: 242
Joined: Fri Nov 17, 2006 10:27 am
Location: Perth, WA

Post by croatian4x4 »

If you dont want anything too hardcore and only gunna use it for touring and Fraser Island and sorts, whats wround with a pretty standard 75 series? Just for shits and giggles you can add a 2" suspension lift and some bigger tyres.... but why would you need anything more for Fraser island? The 75 would hold up perfectly in standard form on the beach...

My opinion anyways.
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

croatian4x4 wrote:If you dont want anything too hardcore and only gunna use it for touring and Fraser Island and sorts, whats wround with a pretty standard 75 series? Just for shits and giggles you can add a 2" suspension lift and some bigger tyres.... but why would you need anything more for Fraser island? The 75 would hold up perfectly in standard form on the beach...

My opinion anyways.
X2. 2" lift, wider tyres, long range fuel tank, Elecronic rust protection, heaps of fish oil, wash thoroughly - ideal 75 for Fraser!
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 100
Joined: Tue Mar 09, 2004 7:56 am
Location: Northern Gold Coast

Post by Fishin' Dave »

Here's my short list so far
4" lift and 33's
Rust prevention - electronic +
Alloy nudge bar to hold rods, ariels and lights - no bulls on Fraser
Long range tank - biggest I can get
Stronger front under guard (bash plate)
Snorkel - sometimes you get caught in thre water
Diff breathers
Dual batteries for the fridge (possibly a solar panel on the roof)
Deep dish mats inside
Front & rear recovery points

What have I forgotten?

Dave
80 series Extra Cab - a work in progress.
Posts: 211
Joined: Fri Apr 04, 2008 8:40 pm
Location: West Victoria

Post by Corgie Carrier »

How much money do you want to spend? Is it a ute or troopy?

I have a 95 troopy with an OME Dakar spring kit, which is about 2-3" lift and I have always run 33x12.5s and they don't touch anywhere, 4" lift is comp truck lift and makes it easier to roll your truck.

As for long range tank, if a ute, just get a square tank mounted in the back, cheaper and can hold more fuel than any under body tank. The place I used to work at used one for an oversize pilot vehicle, just used a hose to gravity feed it into your normal tank when you get low.

For long term use on the island a gal chassis is a good idea, while you have the body off, get the bottom and lower panels sand blasted. Then paint them with something like POR15 paint and top coat it with something like rhinoliner, there are lots of similar paints that are cheaper and do a similar job.

Apart from the underfront protection I would leave the rest of the truck the way it is.

Just my 0.02c worth

Neale
1977 Range Rover Classic
1989 Range Rover Classic (Project)
1993 Discovery 200tdi (Project)
1995 Landcruiser Troopcarrier
1996 Discovery 300tdi (Daily Driver)
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

does electronic rust protection really work......
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Post by Canyonero 4x4 »

:armsup: Xtra-cab chop :armsup:
Dave
Posts: 100
Joined: Tue Mar 09, 2004 7:56 am
Location: Northern Gold Coast

Post by Fishin' Dave »

The base starting vehicle is still under debate - has to be a ute but I really like the idea of extra space behind the seats so a troopy cut to an extracab is a real consideration - I have a current model Hilux diesel extracab as my daily driver so I'm used to extracabs.
Creative Conversion will do it to raw stage for about 4k
Troopys are cheaper than utes to buy as a starter truck as well.

I'd like to start with 4.2lt diesel rather than the 2H so the start truck would have to be newer than 1990.
It will double as a tow vehicle for my 6m boat so even better would be newer than 10/96 so it could tow 3.5t - pre 10/96 trucks have 2.5t towing capacity from what I have read.

I'm still planning the truck but at this stage it looks like:
2 - 3" Suspension
33's
Rust prevention
Good spot lights
Dual batteries
Long range tank
Under tray water tank
Trick paint and some inside goodies - GPS, UHF, Consoles, bucket seats etc

Dave
80 series Extra Cab - a work in progress.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest