Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
98 GV Ground Clearance
98 GV Ground Clearance
What is GV ground clearance on all stock inc stock tyres 235/60/16? Try to find out hw far mine had sagged.
I don't have an answer for your question, but the question you are asking won't really help because it's not easy to measure.
The lowest point to the ground on a GV will be the rear diff centre, and unless by sag you mean you've got flat tyres, that measurement won't mean anything.
Which "next" point on the chassis you choose to measure from opens a can of worms.
The correct way to measure ( which removes tyre diameter, tyre pressure or tyre wear) is from the top of the rim to the top of the wheelarch.
As an aside, coil sprung cars with correctly placed bumpstops don't really "sag." I'd be surprised if it's dropped more than 10mm from new, assuming it's not carrying more weight than stock.
Steve.
The lowest point to the ground on a GV will be the rear diff centre, and unless by sag you mean you've got flat tyres, that measurement won't mean anything.
Which "next" point on the chassis you choose to measure from opens a can of worms.
The correct way to measure ( which removes tyre diameter, tyre pressure or tyre wear) is from the top of the rim to the top of the wheelarch.
As an aside, coil sprung cars with correctly placed bumpstops don't really "sag." I'd be surprised if it's dropped more than 10mm from new, assuming it's not carrying more weight than stock.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Measure from the centre of the hub to the top of the wheel arch and then go here http://rvcs-prodweb.dot.gov.au/pls/wwws ... ify_Search and do a search for your model and you will find the same measurements when new. When doing the search set 'STATUS' to 'ALL' and you don't need to fill in all the other info, just fill in the Marketing Model e.g. Grand Vitara.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
hmmm - I understand the theory of measuring from the centre of the hub to the wheelarch top but that's a location that requires a guess to get right when your standing at the car, which is why I think the rim edge is better.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Yes, but the centre can't change and it's pretty easy to find as well as the fact that the figures for a stock vehicle are done this way so at least you have a direct comparison otherwise you then have to also measure the rim diameter and halve it and then add that to your measurement to be able to compare back to the stock figures. If you are just checking between before and after lifts or between various vehicles for comparisons sake then off the edge of the rim is quick and easy.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Who is online
Users browsing this forum: No registered users and 0 guests